RAIN GAUGE

Battery Installation for the rain gauge:

∙Press the tabs back as indicated below to unlock the rain gauge cover.

BATTERY COVER

∙Lift the rain gauge cover off its base. Then carefully remove the packing tape from the rocker assembly.

∙Open battery cover and insert 2-AA batteries according to the polarity indicated. Close the battery cover

∙Replace & lock the rain gauge cover on the base.

∙Go to the wireless display and enter SET UP mode. Scroll down to WIRELESS SENSOR RECEPTION and select SEARCH NOW then exit. The wireless display monitor will search for all remote sensors. Total rainfall reading (in this case “0” mm or inch) will appear within 2 minutes if the RF transmission is successful and the monitor and the rain gauge are within the effective transmission range.

∙If the rainfall readings remain “- - -“after 2 minutes of searching, the RF transmission has failed.

∙Shorten the distance between the monitor and the rain gauge and search for the sensor again. If the RF transmission still fails, shorten the distance again and reset the rain gauge by removing all batteries from the rain gauge and wait for 10 seconds before re-installing the batteries again. Repeat the steps above until the RF communication are complete.

Positioning the rain gauge:

Before mounting the rain gauge, be sure the rain gauge & monitor are within effective transmission range and batteries are installed.

∙Mount the rain gauge on a level surface in an open area within the 131-footwireless range of the wireless display. Reduce distance by half for every obstruction between the rain gauge and the wireless display.

∙Mount in an area not blocked on the top or sides, so rain can freely reach the rain gauge (for example, not under an overhang or too close to a building or fence).

∙To prevent false rainfall readings caused by water splashes, choose a location that is level and not too close to the ground, a swimming pool, lawn sprinklers, or anywhere water might accumulate or run off.

∙Mount the rain sensor at least 6 feet off the ground and level for optimum wireless transmission.

∙The rain sensor should be accessible to allow for periodic cleaning of debris or insects. The screen in the cylinder of the rain gauge filters most debris (such as leaves) that might fall into the rain gauge. To avoid frequent build-up of debris in the cylinder, do not mount the rain gauge too close to the trees or plants.

∙The Rain Gauge is self-emptying and can be left out all year or stored in the winter. If stored for the winter, remove the batteries.

∙NOTE: If the rain gauge is outside for the winter, it will not count snowfall, only what melts.

∙Hold the base of the rain gauge flat against the mounting surface then use a level to make sure the rain gauge (as it rests on the mounting surface) is horizontally level.

P a g e 11

Page 10 Page 12
Page 11
Image 11
La Crosse Technology 308-807 manual Battery Installation for the rain gauge, Positioning the rain gauge
Page 10 Page 12

308-807 specifications

La Crosse Technology 308-807 is an advanced wireless weather station designed for both home and professional use, offering a range of features that enhance its utility and user experience. This device goes beyond basic weather monitoring, providing users with real-time data about various atmospheric conditions.

One of the standout features of the La Crosse Technology 308-807 is its large, easy-to-read LCD display. This display showcases current temperature, humidity levels, and barometric pressure, allowing users to monitor their environment effortlessly. The backlight feature ensures that readings can be seen clearly in low-light conditions, enhancing usability during the night or in darker areas.

The weather station is equipped with wireless technology that allows it to receive data from its outdoor sensor unit from a considerable distance. This means that you can place the sensor outside to gather accurate readings while keeping the main unit inside. The wireless range generally extends up to 300 feet, depending on environmental conditions, ensuring that you can monitor the weather from the comfort of your home.

Temperature and humidity measurements are not limited to outdoor conditions; the La Crosse Technology 308-807 also includes the capability to monitor indoor climate, making it a multifunctional device. Users can track temperature fluctuations in different rooms, ensuring optimal comfort levels throughout their living space.

Another key characteristic of the 308-807 is its ability to store historical data. With memory functionality, the device can keep track of the highest and lowest readings over a specified period, allowing users to analyze trends in temperature and humidity. This feature can be especially helpful for those looking to maintain specific environmental conditions for plants, pets, or general climate control.

Additionally, the device offers customizable alarms that notify users when conditions surpass predetermined thresholds. This feature is particularly useful for those with specific needs such as wine collectors, plant enthusiasts, or individuals who need to monitor sensitive living environments.

Moreover, La Crosse Technology has a reputation for durability and reliability, and the 308-807 is no exception. Built with quality materials, it is designed to withstand outdoor conditions while providing consistent and accurate readings.

In conclusion, the La Crosse Technology 308-807 stands out as a versatile weather station equipped with user-friendly features, advanced wireless technology, and robust memory capabilities. Its design caters to both amateur weather-watchers and serious enthusiasts, making it an excellent choice for anyone interested in monitoring their climate accurately and conveniently.
Top Page Image Contents