Version 1.2 - 9/23/2008

What You Need to Get Started:

High-speed Internet connection – cable, DSL or other broadband Internet service will work. NOTE: If you only have a Dial-Up Internet connection, Weather Direct® will not work. However, you can use Weather Direct® Lite with a Dial-Up connection using your computer’s USB port – see www.weatherdirect.com/lite

Router or broadband modem with built-in router. (contact your Internet service provider ISP for information on compatibility with their service)

If you have any questions about routers, or you would like a recommendation on a great router for use with Weather Direct®, see - www.weatherdirect.com/router

Valid e-mail address – required to make sure you can retrieve your password and receive other information about your user profile.

2 “AA” Alkaline batteries for the Wireless Outdoor Sensor

NOTE: Rechargeable batteries are not recommended in the Wireless Outdoor Sensor due to the wide variation in performance between brands and types. Please use only fresh Alkaline batteries.

3 “AA” Alkaline or Rechargeable batteries for the Wireless Display

Visit www.weatherdirect.com and click “Register” to Start

After you have registered and selected a forecast location and Time Zone for your Wireless Display, the forecast data will show up on the display within 60 seconds.

A reasonably current Windows, Macintosh, or Linux PC with internet browser installed is required for initial set up and configuration changes.

The browser must be configured with Java Script enabled. Most browsers allow JavaScript as a standard feature. If you have turned off support for JavaScript in your browser, please allow JavaScript to run again to register or configure your Device.

Page 6 of 26

Page 6
Image 6
La Crosse Technology WD-2512U owner manual What You Need to Get Started