La Crosse Technology WD-3105 Changing Settings on Your Wireless Display, The Four SET modes are

Version 2.2 - 08/05/2008

Changing Settings on Your Wireless Display

Press and hold the “SET” Key until the Wireless Display beeps to enter the SET mode. Press the “SET” Key to toggle through the four SET modes. If you wait for 5 seconds without pressing a key, the Wireless Display will exit the SET mode and return to normal operation.

The Four SET modes are:

Set Mode 1 – Set LCD Contrast (0-7)

ƒPress and Hold the “SET” Key until the Wireless Display beeps to enter the SET mode

ƒ“LCD” and number (0-7) will flash near the top. “SET LCD CONTRAST” will scroll across the bottom

ƒPress the “+” Key to update the LCD Contrast settings. Lightest Contrast = “0”, Darkest Contrast = “7”

ƒPress the “SET” Key to save the current settings and advance to the next option

Set Mode 2 – Enable Acoustic Weather Warnings (ON/OFF)

NOTE: This SET mode is only available when the Severe Weather Alerts Expansion Option is active. In addition to the scrolling text of the Severe Weather Alerts, an Acoustic Weather Warning provides a beep to notify you of a weather condition. You can turn this beep off to silence this warning so only the text of the warning is displayed. To change the setting, follow the instructions below:

ƒ Press the “SET” Key until “AAL ON” or “AAL OFF” flashes at the top and “ENABLE ACOUSTIC WEATHER WARNINGS” scrolls across the bottom

ƒPress the “+” Key to turn AAL “ON” or “OFF”

ƒPress the “SET” Key to save the current settings and advance to the next option

NOTE: You can silence an Acoustic Weather Warning by pressing any Key.

Set Mode 3 - Set Text Scrolling Speed (1-4)

ƒPress the “SET” Key until “Scr” flashes at the top and “SET SCROLL SPEED” scrolls across the bottom

ƒThe standard speed is set to “2”

Page 15 of 26