Adjusting the Audio Tone

If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.

To adjust the audio tone:

1)While on a call, press Menu/Select.

2)Move the cursor to select Audio Tone, and then press Menu/Select.

3)Move the cursor to select desired option (High Tone, Natural Tone, or Low Tone), and then press Menu/ Select. Selected option appears in the display for two seconds, and then the display returns to normal.

Activating T-Coil Mode

Digital cordless phones generate magnetic signals that can cause noise on hearing aids equipped with a telecoil (“T” coil) feature. This phone includes a special “T-coil” mode that, when activated, reduces the magnetic noise generated by the handset.

1)With the phone in standby, press MENU/SELECT.

2)Select the Handset Setup menu, and then the T-coilsubmenu.

3)Move the cursor to select On or Off.

4)Press MENU/SELECT. You will hear a confirmation tone.

When the T-coil mode is turned on, appears in the display during a call.

Note: Using the T-coil mode may shorten the handset battery’s talk time; make sure you always return the handset to the charging cradle when not in use. Only activate T-coil mode if you experience problems using the handset with a T-coil-equipped hearing aid.

Adjusting the Ringer, Earpiece and Speaker Volume

37

Page 37
Image 37
Uniden DECT1560 manual Adjusting the Audio Tone, Activating T-Coil Mode