MP3/WMA mode
D01
D02 |
| A |
D03 | D04 |
|
T001 | T001 |
|
T002 | T002 |
|
T003 | T003 |
|
T004 | T004 |
|
T005 | T005 |
|
T001 | T006 | B |
T007 |
| |
T002 |
| |
T008 |
| |
T003 |
| |
T009 |
| |
T004 |
| |
T010 |
| |
T005 |
| |
T011 |
| |
T006 |
| |
|
|
ADirectories B Tracks · Files
Preparing a USB data carrier
For the device to recognise a USB data car- rier, it must be specified as mass storage device and formatted using the FAT16 or FAT32 file system and contain MP3 or WMA files.
You can create up to 1,000 directories on a USB data carrier. You can use this device to access directories individually. The direc- tory depth is unlimited.
You can store up to 10,000 files in every directory.
Note
Blaupunkt cannot guarantee the prop- er functioning of all USB data carriers available on the market.
Switching to MP3 mode
Inserting/removing SD/MMC card
Insert the SD/MMC card with its la-
belled side to the left and its contacts |
| |
| ||
first into the card slot 9 until it clicks | ENGLISH | |
into place. | ||
| ||
You can now select the SD/MMC card as au- |
| |
dio source with the SRC button 3. |
| |
|
To remove the SD/MMC card,
push on the SD/MMC card until it dis- engages.
Pull the SD/MMC card out of the card slot 9.
Starting MP3 mode of SD/MMC cards
Press the SRC button 3 repeatedly until the display shows "SD CARD".
The playback starts.
Connect USB data carrier and start MP3 mode
To be able to connect a USB data carrier (e.g. a USB stick or USB hard disk), the supplied USB cable must be connected to the rear side of the device as described in the installation instructions. This cable can be routed, for example, to the glove com- partment or a suitable place of the center console.
Note
Always switch off the device before connecting or disconnecting the USB data carrier so that the data carrier is correctly registered and unregistered.
Connect the USB data carrier with the USB cable.
59
