Display
Press the 
or 
button 2 to switch between the colour components.
Press the 
or 
button 2 to adjust the value of a colour component.
When you have finished making your chang- es,
press the MENU button >. To exit the menu,
press the ESC button <.
Selecting the colour of the display illumination from the colour scan (COL SCAN)
Press the MENU button >. The display shows "MENU".
Press the 
or 
button 2 repeat- edly until "COL SCAN" appears on the display.
Press the 
button 2 to start the col- our seek.
The device starts changing the display illu- mination colour. During the colour scan, the display intermittently shows "SCANNING" and "OK (MENU)".
Note:
You can cancel the colour scan by
pressing the
or
button 2 without adjusting a new display colour.
To select the currently set colour,
press the MENU button >. To exit the menu,
press the ESC button <.
Switching the constant colour change for the display illumination on/off (SCAN)
You can select a constant colour change as the colour of the display illumination. If the colour change is activated, the display col- our changes constantly. The colour change is switched on or off in the menu.
Press the MENU button >. The display shows "MENU".
Press the
or
button 2 repeatedly until "SCAN ON" or "SCAN OFF" ap- pears on the display.
Press the 
button 2 to call up the submenu.
Press the 
button 2 to toggle be- tween ON (colour change on) or OFF (colour change off).
When you have finished making your chang- es,
press the MENU button >. To exit the menu,
press the ESC button <.
72
