Blaupunkt SD48 7 648 000 310, SD48 7 648 001 310 Selecting CDs, Switching to CD-changer mode

Fast searching (audible)

To fast search backwards or forwards,

￿ press and hold down the or button 2 for longer than two seconds.

Seek tuning continues as long as you hold the button pressed.

Configuring the display

Three options are available for the display in CD changer mode:

• Track number and playing time

• Track number and time

• CD number and track number

To switch between the different display op- tions,

￿ press the DIS button ;.

Repeating individual tracks or whole CDs (REPEAT)

You can repeatedly play the current track or all tracks on the current CD.

￿ Press the button 4 RPT 8 repeatedly until the desired function appears on the display:

• "RPT TRACK" (current track)

• "RPT DISC"

(all tracks on the current CD)

• "RPT OFF" (end repeat)

CD-changer mode

CD-changer mode

Notes:

•Information about handling CDs, in- serting CDs and operating the CD changer can be found in the operat- ing instructions supplied with your CD changer.

•Before connecting a CD changer, check whether the "CDC ON" setting has been select in the menu. For fur- ther details, please read the section "Adjusting the rear AUX-IN input" in the chapter "External audio sources".

Switching to CD-changer mode

￿Press the SRC button 3 repeatedly until the display shows "CDC/AUX-IN".

If a CD changer is connected, the display shows "CHANGER". The device starts play- ing the first CD that the CD changer de- tects.

Selecting CDs

To move up or down to another CD,

￿press the or 2 button once or several times.

Note:

The device will ignore empty CD slots in the changer and slots containing invalid CDs.

Selecting tracks

To move up or down to another track on the current CD,

￿press the or 2 button once or several times.

62