Radio mode
Tuning into a station
There are various ways of tuning into a sta- tion:
Automatic station seek tuning
Press the 
or 
button 2.
The radio tunes into the next receivable station.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu- ally if the convenient RDS function and RDY are deactivated.
Press the 
or 
button 2.
Browsing through broadcasting networks (FM only)
If radio stations provide several pro- grammes, you have the option of browsing through these
Note:
The convenient RDS function and PTY must be activated before you can use this feature.
Press the 
or 
button 2 to switch to the next station on the broadcasting network.
Note:
When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function.
Adjusting the sensitivity of the station seek tuning (SENS)
You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into
those with a weak reception. | ENGLISH |
| |
Press the MENU button >. |
|
The display shows "MENU". |
|
Press the or button 2 repeatedly |
|
until "SENS" and the currently set value |
|
appears on the display. |
|
"SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity set- ting.
Press the button 
2 to open the sub- menu.
Set the desired sensitivity level using
the 
or 
button 2.
When you have finished making your chang- es,
press the MENU button >. To exit the menu,
press the ESC button <.
Note:
You can set different sensitivity levels for FM and AM (MW/LW).
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
53
