Blaupunkt SD48 7 648 000 310 Convenient RDS functions, Selecting the waveband/memory bank

Models: SD48 7 648 001 310 SD48 7 648 000 310

1 54
Download 54 pages 46.57 Kb
Page 15
Image 15

Radio mode

Convenient RDS functions

This device is equipped with an RDS (Radio Data System) radio receiver. Many FM sta- tions broadcast a signal that not only car- ries the programme but also additional information such as the station name and programme type (PTY).

The station name appears on the display as soon as the tuner receives it.

The convenient RDS functions AF (Alternative Frequency) and REGIONAL ex- tend your radio’s range of functions.

AF: If the RDS function is activated, the radio automatically tunes into the best receivable frequency for the station that is currently set.

REGIONAL: At certain times, some ra- dio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are transmitting different pro- gramme content.

Note:

REGIONAL must be activated/deacti- vated (REG ON/OFF) separately in the menu.

Switching the RDS function on/off

If you want to use the RDS functions (AF and REGIONAL),

￿press and hold down the TRAF•RDS button = for longer than two sec- onds.

The RDS function is active if RDS appears on the display.

To deactivate,

￿press and hold down the TRAF•RDS button = for longer than two sec- onds.

The RDS symbol disappears from the dis- play.

Switching REGIONAL on/off

￿Press the MENU button >. The display shows "MENU".

￿Press the or button 2 repeatedly until "REG ON" or "REG OFF" appears on the display.

￿Press the button 2 to open the sub- menu.

To switch REGIONAL on/off,

￿press the button 2.

￿Press the MENU button >. To exit the menu,

￿press the ESC button <.

Selecting the waveband/memory bank

This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.

Five stations can be stored in each memory bank.

To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,

￿briefly press the BND•TS button 5.

52

Page 15
Image 15
Blaupunkt SD48 7 648 000 310 Convenient RDS functions, Selecting the waveband/memory bank, Switching Regional on/off