Troubleshooting
1)Select the base you want to
2)Press and hold END and # for more than five seconds. Select Deregister HS.
3)Select the handset which you are operating, and then press Menu/Select.
4)The phone will ask you to confirm the deregistration. Select Yes. The selected handset will clear its registration information only from the base it is currently connected to, and then delete the link to the base from its own memory.
5)When the base information is deleted, the handset displays Handset not
6)
If the handset cannot contact the base, it will display Out Of Range. Make sure the handset is in range of the base and the base is connected to power; you can also reset the handset without the base (see the next section).
Resetting the Handset Without the Base
If your original base is not available for some reason, you can still reset the handset and use it with another base.
1)Press and hold END and # for at least five seconds.
2)Move the cursor to select Base Unavailable and then press Menu/Select.
3)Select the base which you want to
4)Move the cursor to select Yes, and then press Menu/Select. You hear a confirmation tone, and the handset deletes its own base information without contacting the base. If the handset was registered to only one base, it displays Handset not
5)Register the handset to the new base (see Registering accessory handsets on page 13).
52
