Advanced Setup menu
Function | Description | |
| Lamp Power | |
| Selects the projector lamp power between Normal and Economic modes. | |
| Reset Lamp Timer | |
Lamp Settings | Once the lamp is renewed, select Reset to return the lamp timer to "0". See | |
"Resetting the lamp timer" on page 55 for details. | ||
| ||
| Equivalent Lamp Hour | |
| Shows the lamp hour information. See "Getting to know the lamp hour" on | |
| page 52 for details. | |
|
| |
| Selects an input source type for the HDMI signal. Auto is the default and | |
HDMI Settings | recommended setting. You can also manually select the source type. The | |
different source types carry different standards for the brightness level. | ||
| This function is only available when the HDMI signal is selected. | |
|
| |
| Selects a baud rate that is identical with your computer’s so that you can | |
Baud Rate | connect the projector using a suitable | |
the projector’s firmware. This function is intended for qualified service | ||
| ||
| personnel. | |
|
| |
| Press ENTER to display the grid test pattern. It helps you adjust the image size | |
Test Pattern | and focus and check that the projected image is free of distortion. | |
The function is only available when the projector detects no input | ||
| ||
| signal. | |
High Altitude | A mode for operation in areas like high altitude or high temperature. See | |
Mode | "Operating in a high altitude environment" on page 39 for details. | |
|
| |
Audio Settings | See "Adjusting the sound" on page 36 for details. | |
|
| |
| Password | |
| Limits use of the projector to only those who know the correct password. See | |
Password | "Utilizing the password function" on page 23 for details. | |
Change Password | ||
| ||
| You will be asked to enter the current password before changing to a new one. | |
| See "Utilizing the password function" on page 23 for details. | |
Lan Control | See "Controlling the projector through a Lan environment" on page 37 for | |
Settings | details. | |
|
| |
| Returns all settings to the factory preset values. | |
Reset All Settings | The following settings will still remain: names of user modes, | |
Keystone, Language, Projector Position, High Altitude Mode, | ||
| ||
| Password, and Expert Mode. | |
|
| |
| The Expert Mode menu is password protected and only accessible by | |
| authorized calibrators. The ISF (Imaging Science Foundation) has developed | |
| carefully crafted, | |
Expert Mode | and has implemented a training program for technicians and installers to use | |
these standards to obtain optimal picture quality from BenQ video display | ||
| devices. Accordingly, we recommend that setup and calibration be performed | |
| by an ISF certified installation technician. | |
| For more information, please go to www.imagingscience.com or | |
| contact the place you purchased the projector. |
English
Using the projector | 49 |