BenQ SH940 user manual Using the preset and user modes, Selecting a preset mode

Using the preset and user modes

Selecting a preset mode

The projector is preset with several pre-defined picture modes so that you can choose one to suit your operating environment and input source picture type.

To select a picture mode that suits your need:

•Using the remote control

Press PRESET MODE on the projector or MODE/ENTER on the remote control repeatedly until your desired mode is selected.

• Using the OSD menu

1. Press MENU on the projector or MENU/EXIT on the remote control and then press / until the Picture -- Basic menu is highlighted.

2.Press to highlight Picture Mode.

3.Press / until your desired mode is selected.

These modes consist of preset values suitable for various projection situations as described below:

•Cinema: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.

•Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms.

•Presentation: Is designed for presentations. The brightness is emphasized in this mode to match PC and notebook coloring.

•sRGB: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated camera, and for viewing PC graphic and drawing applications such as AutoCAD.

•User 1/User 2: Recalls the customized settings. See "Setting the User 1/User 2 mode" on page 28 for details.

Fine-tuning the selected picture mode

The pre-defined picture mode settings can be altered via the available items shown in the Picture -- Basic and Picture -- Advanced menus.

To fine-tune the picture mode:

1.Press MENU on the projector or MENU/EXIT on the remote control, and then press / until the Picture -- Basic or Picture -- Advanced menu is highlighted.

2.Press to highlight the item you want to adjust and press / to set your desired value. Your selection is automatically stored in the projector and associated with that input source.

See "Fine-tuning the picture quality" on page 29 and "Advanced picture quality controls" on page 30 for details.

Each time you change the picture mode, the projector also changes the setting to the one which was last set for that particular picture mode on that particular input. If you change the input source, the most recently used picture mode and settings for that input and resolution will be restored.

English

Using the projector 27