English
1.Turn the power off and disconnect the projector from the power outlet. Turn off all connected equipment and disconnect all other cables. See "Turning the projector off" on page 41 for details.
2.Slightly lift the projector up. Loosen the screws on the lamp cover.
3.Remove the lamp cover.
4.Loosen the screws that hold the lamp to the projector. If the screws are not loosened completely, they could injure your fingers.
5.Lift the handle so that it is perpendicular to the lamp. Use the handle to slowly pull the lamp out of the projector.
Notes
•Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered.
•Do not place the lamp in locations where water might splash on it, children can reach it, near or above heat sources, or near flammable materials.
•Do not insert your hand into the projector when the lamp is removed. If you touch the optical components inside, it could cause blurred images.
6.Insert the replacement lamp. Make sure it is pushed fully and firmly in place.
7.Tighten the screws securing the lamp box.
8.Ensure the handle is fully locked in place.
Notes
•Please be careful to not
•Loose screws may cause a bad connection, which could result in malfunction.
9.
10.Tighten the screws on the lamp cover.
11.Reapply power and turn the projector back on.
54 Additional information
