English
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connecting with video equipment" on page 17 for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1.Press MENU on the projector or MENU/EXIT on the remote control to open the OSD menu and press 
/ 
to highlight the Advanced Setup menu.
2.Press 
to highlight Audio Settings and press ENTER. The Audio Settings page is displayed.
3.Highlight Mute and press 
/ 
to select On.
Adjusting the sound quality
To adjust the sound level, press VOLUME+/VOLUME- on the remote control, or:
1.Repeat steps
2.Press 
to highlight Volume and press 
/ 
to select a desired sound level.
To adjust the sound treble and bass:
1.Repeat steps
2.Press 
to highlight Treble/Bass and press 
/ 
to select a desired value.
To set the SRS:
1.Repeat steps
2.Press 
to highlight SRS and press 
/ 
to turn on/off the function.
Turning off the Power On/Off Ring Tone
To turn off the ring tone:
1. | Repeat steps |
2. | Press to highlight Power On/Off Ring Tone and press / to select Off. |
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone.
36 Using the projector
