Resetting Total Rainfall and 24 Hour Rainfall

•To view the alarm pres and hold the ALM/SET button. This will cause the receiver to beep if the set alarm value has already been reached.

•Total Rainfall: Press and hold the RESET/+ button. The receiver will beep, and the total rainfall will reset to 0.00”.

•24 Hour Rainfall: To reset the 24 Hour Rainfall to “0.00”, remove the batteries, wait 2 minutes, and then re-insert the batteries.

Note: The 24H Rainfall will not reset to “0.00”. Instead the value will update every hour.

The 24H Rainfall will only show “0.00” if there is no rainfall for a full period of 24 hours.

Light Rain/Heavy Rain Indicator

The wireless rain gauge features 2 rain level indicators: Light Rain and Heavy Rain.

Light Rain: Indicated by 3 clouds and rain with no animation.

The Light Rain icon will appear if any rain is registered over the past 10 minutes.

Heavy Rain: Indicated by 3 clouds with animated rain.

The Heavy Rain Icon will appear if more than 10 counts (0.2”) have been registered over the past 10 minutes.

•RX: Indicates the receiver battery is low.

•TX: Indicates the rain gauge battery is low.

The Receiver can be positioned on a flat surface or on a wall.