Appendix
The image is distorted or runs off.
–Check PC adjust menu or Screen menu and adjust them. See pages
PIN code dialog box appears at start-up.
–PIN code lock is being set. Enter a PIN code ("1234" or numbers you have set). See pages 21,
Page Up/Down function does not work.
–Make sure your computer is connected to the projector with USB cable. See page 16.
–Check cable connection between the projector and your computer. See page 16.
The Remote Control does not work. | – Check the batteries. |
| – Make sure no obstruction is between the projector and remote |
| control. |
| – Make sure you are not too far from the projector when using the |
| remote control. Maximum operating range is 16.4'(5 m). |
| – Make sure the code of the remote control is conformed to the |
| projector’s code. See page 55 |
| – Unlock the Key lock function for the remote control function. See |
| page 56. |
| – Check |
| “ON”. See page 13. |
|
|
Indicator blinks or lights. | – Check the status of the projector with referring to "Indicators and |
| |
| projector Condition". See page 72. |
Wireless Mouse function does not work.
–Check the connection between the projector and your computer.
–Check the mouse setting on you computer.
–Make sure the mouse driver is installed on your computer, otherwise, the remote control can not be used as a wireless mouse.
–Make sure the signal is from the computer, otherwise, the remote control can not be used as a wireless mouse.
–Turn on the projector before turning on the computer.
The exclamation mark appears on | – Your operation is invalid. Operate correctly. |
the screen. |
|
|
|
Top control does not work. | – The top control is not available if the top control is locked at Key lock |
| |
| under Security of SETTING section. See page 56. |
Unable to unlock the Logo PIN code lock, Security key lock or Security PIN code lock.
–Contact the dealer where you purchased the projector or the service center.
68
