Sanyo PLC-XU305A Computer Input, Input Source Selection RGB Computer 1/Computer Analog, Note

Computer Input

Input Source Selection (RGB: Computer 1/Computer (Analog))

Direct Operation

Choose either Computer 1 or Computer  by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Top Control

INPUT button

Remote Control

COMPUTER button

Menu Operation		Input Menu
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and

then press the Point ► or SELECT button.

Use the Point ▲▼ buttons to select either Computer 1 or Computer  and then press the Point ► or SELECT button to access the submenu items.

3 When Computer 1 is selected, use the Point ▲▼ buttons to select RGB and then press the SELECT button.

When Computer  is selected, use the Point ▲▼ buttons to select RGB(Analog) and then press the SELECT button.

RGB

RGB(PC digital)

Wired 1

RGB RGB(PC digital)

Wired 1

Computer

1

Note:

•Network is for the Network function. See owner’s manual “Network Set-up and Operation”.

•When the Input Search function is set to On1 or On in the Auto setup function, the input signal will be searched automatically (p.47).