Sanyo PLC-XU355A Setting, On start, Note, Standby mode, Closed caption, Closed Caption

Setting

On start

When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.

Note:

Be sure to turn off the projector properly (see "Turning Off the Projector" on page 22). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

Standby mode

This function is available when operating the projector via network.

Network..... Supply the power to the network function even

after turning off the projector. You can turn on/ off the projector via network, modify network environment, and receive an e-mail about projector status while the projector is powered off.

Eco............. Select Eco when you do not use the projector

via network. The projector’s network function will stop when turning off the projector.

Refer to the owner’s manual “Network Set-up and

Operation”.

Note:

•Factory default is Network.

•When selecting Network, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off.

Closed caption

Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4.

If the closed caption is not clear, you can change the text from Color to White.

Note:

The Closed Caption is available only under the situation below.

•When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on Auto.

•The system must be set on NTSC or Auto in Video System Selection. (P.41)

•The icon of Closed caption is displayed in gray while it is not available.

•The Closed caption is unavailable when On-Screen menu and P-Timer are displayed.

Closed Caption

Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4, and then Press SELECT button.

54