Sanyo PLC-XU305A Basic Operation Remote Control Operation, COMPUTER/VIDEO/NETwORK button

Basic Operation

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

COMPUTER/VIDEO/NETwORK button

Press the COMPUTER, VIDEO or NETWORK button on the remote control to select the input source. See pages29- 30,39-40 for details.

Refer to the owner’s manual “Network Set-up and Operation” for details about the network input.

Remote Control

COMPUTER	VIDEO button
button	NETwORK
INFO.	button
button

FREEZE button

Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Fig.1 will appear on the Screen menu while the Freeze function is working.

Fig.1

INFO. button

Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter , Power management, Keylock, PIN code lock and Remote control (p.60).

D.ZOOM buttons

Press the D.ZOOM buttons on the remote control to enter to the Digital zoom +/– mode. See page 38 for details.

LAMP button

Press the LAMP button on the remote control to select the lamp mode for changing the brightness on the screen.

Normal	Normal brightness.
Eco	Lower brightness reduces the lamp power
	consumption and extends the lamp life.

FREEZE button

D.ZOOM buttons

LAMP button

Note:

See the next page for the description of other buttons.