Sanyo PLC-XU305A, PLC-XU355A owner manual Video Input, Input Source Selection Video, S-video

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the INPUT button on the top control or the VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below.

Top Control	INPUT button
	Computer 1
	Computer 
	Video
	S-video
	Network

Remote Control

VIDEO button

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and

then press Point ► or the SELECT button.

Use the Point ▲▼ buttons to select either Video or S-videoand then press the SELECT button.

Video	When video input signal is connected to the
	VIDEO jack, select Video.
S-video	When video input signal is connected to the S-
	VIDEO jack, select S-video.

Note:

•Network is for the Network function. See the owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to On1 or On in the Auto setup function, the input signal will be searched automatically (p.47).

Input Menu

RGB

RGB(PC digital)

Wired 1

Video

RGB

RGB(PC digital)

Wired 1

3