Electronic Monitor TROUBLE-SHOOTING

If the console does not function properly, the batteries should be replaced. To replace the batteries, see assembly step 7 on page 8. In addition, make sure that the console wire is connected to the extension wire. See assembly step 6 on page 7.

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted. In order to adjust the reed switch, the Left Side Shield (5) must be removed. Remove the 1/2Ó Nylon Locknut (37) from the Pedal Bolt (36). Turn the Pedal Bolt and remove it from the Crank (38); do not remove the Pedal Bolt from the Left Pedal Arm (7). Set the Left Pedal Arm aside.

	Top		5
			5
		37	Rear
		37
			38
			66
36	7
36
			66

Remove the three M4 x 38mm Screws (66) from the bottom of the Left Side Shield (5). Grasp both Side Shields at the top and gently pull them apart. Make sure that the arm of the Crank (38) is in the position shown in the drawing above. Hold the Left Side Shield at the rear and pull it gently away from the frame. Work the Left Side Shield forward off the arm of the Crank and remove it.

Next, locate the
Reed Switch (3).
Loosen, but do
not remove, the
M4 x 16mm	38
Screw (51).	3
Screw (51).
Slide the Reed	51
Switch slightly
toward or away	Magnet
from the magnet
on the pulley.
Retighten the
Screw. Turn the Crank (38) for a moment. Repeat until

the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield.

HOW TO ADJUST THE TENSION BELT

If the pedals do not have enough resistance, even when the pedal resistance knob is turned to the maxi- mum setting, the Resistance Belt (24) may need to be adjusted. To adjust the Resistance Belt, the left side shield must be removed. Refer to the instructions at the left to remove the left side shield.

	Next, turn the
	pedal resistance	Latch
	knob to its low-
	est setting.	49
	Locate and
	open the latch
	on the Resis-
	tance Belt	24
	Clamp (49).	24
	Clamp (49).	38
	Grip the end of	38
	the Resistance
	Belt (24) and

pull it down to remove any slack. While holding the end of the Tension Belt, close the latch on the Tension Belt Clamp. Turn the Crank (38) for a moment to make sure that there is not too much resistance. When the resistance strap is properly adjusted, reat- tach the left side shield.

WLEL36070 specifications

The Weslo WLEL36070 is an innovative and versatile piece of fitness equipment designed to help users achieve their workout goals in the comfort of their homes. This electric treadmill stands out for its array of features, advanced technologies, and user-friendly characteristics, making it an excellent option for everyone from beginners to seasoned fitness enthusiasts.

One of the primary features of the Weslo WLEL36070 is its powerful 2.5 CHP motor, which provides the necessary strength and durability for a wide range of workout intensities. Whether you’re walking for fitness or sprinting for speed, the motor ensures smooth operation and a consistent performance. Additionally, the treadmill offers a maximum speed of 10 miles per hour, allowing users to push their limits effectively.

The deck of the WLEL36070 boasts a spacious running surface of 16” x 50”, giving users ample room to move comfortably while exercising. Designed with user safety in mind, the treadmill includes a cushioned running deck that minimizes joint impact, making it gentler on the knees and ankles compared to outdoor running. This enhances workout quality while helping to prevent injuries.

One of the notable technologies incorporated in the Weslo WLEL36070 is the ability to adjust the incline. With a 2-position manual incline feature, users can increase their workout difficulty, targeting different muscle groups and enhancing caloric burn. This adds variety to routines, catering to various fitness levels and preferences.

The WLEL36070 also comes equipped with a built-in LCD display that tracks essential workout metrics such as time, distance, speed, and calories burned. This feature is invaluable for users looking to monitor their progress and set personal fitness goals. The treadmill also includes several preset workout programs, allowing for customized training sessions designed to optimize results and keep users engaged.

Portability is another key characteristic of the Weslo WLEL36070. The treadmill is designed with a folding feature that allows for easy storage and space-saving when not in use. Its lightweight frame and transportation wheels further enhance mobility, making it convenient to relocate within your home.

In summary, the Weslo WLEL36070 is an excellent investment for anyone looking to improve their fitness levels at home. With a robust motor, user-friendly features, adjustable incline, and built-in tracking technology, it offers a comprehensive workout experience that caters to a diverse range of users, ultimately promoting a healthier lifestyle.

Weslo WLEL36070 user manual Electronic Monitor TROUBLE-SHOOTING, HOW to Adjust the Reed Switch

Models: WLEL36070