DeLonghi ESAM6600 Less Coffee, Troubleshooting, C o l l e c t i o n, Message, Meaning, What To Do

19 TROUBLESHOOTING

MESSAGE			MEANING				WHAT TO DO
	• The water tank is empty or is positioned			• Fill the water tank as described in sec-
		incorrectly.				tion 4, and insert it fully.
FILL TANK	• The tank is dirty or encrusted with lime			• Rinse or descale the tank.
		scale.
GROUND TOO FINE ADJUST MILL	•	The coffee runs off too slowly.		•	Turn the grinding regulator (fig. 11) one
AND						click toward the number 7 (see section
						8).
INSERT WATER SPOUT AND	•	The appliance cannot make coffee.		•	Insert the hot water spout, press the
PRESS OK						button and run off water from the spout
						for a few seconds.
	• The grounds container is full or missing.			• Empty the grounds container and clean
EMPTY GROUNDS CONTAINER						as described in section 6, note 7, then
						replace.
	•	After cleaning, the grounds container		•	Open the service door and insert the
INSERT GROUNDS CONTAINER		has not been replaced.				grounds container.
ADD PRE-GROUND	•	With the function selected, the pre-		• Add the ground coffee as described in
		ground coffee has not been poured into				section 9.
COFFEE		the funnel.
	• The coffee beans have run out.			•		Fill bean container.
FILL BEANS CONTAINER	•	If the coffee grinder is very noisy, this		• Contact an authorized De' Longhi serv-
		means a small stone in the coffee beans				ice center.
		has blocked the mill.
	• This indicates the presence of lime scale			•		The descaling procedure, described in
DESCALE		in the appliance.				section 17.3, needs to be performed as
						soon as possible.
	•	After cleaning, the infuser has probably		• Leave the service door closed and the
PRESS		been left out of the coffee maker.				infuser out of the appliance, press the
						pointed	buttons,	then	follow		the
						instructions displayed.
	• The service door is open			•	If the service door			cannot	be closed,
CLOSE DOOR						check that the infuser is inserted cor-
						rectly (section 16.2 - note 1).
	•	The	button has been pressed and		•	Insert the hot water spout (fig. 4).
INSERT WATER SPOUT		the hot water spout has not been insert-
		ed.
INSERT INFUSER ASSEMBLY	•	After cleaning, the infuser has probably			•	Insert the infuser, see section 16.2.
		been left out of the coffee maker.
	• The ground coffee funnel is clogged.			• Empty the funnel with the help of a knife,
	•	Too	many coffee beans or too much			as described in section 9, note 5 (fig. 16).
LESS COFFEE		ground coffee has been added.		• Select a milder taste or reduce the quan-
						tity of ground coffee, then press					or
						or	or		to deliver
						the coffee again.
	• The inside of the appliance is very dirty.			• Clean the inside of the appliance thor-
GENERIC ALARM						oughly, as described in section 16.2. If
						the message is still displayed after clean-
						ing, contact a service center.
C o l l e c t i o n										21