Sanyo PLC-XU355A Video Input, Input Source Selection Component, RGB Scart 1-pin, Menu Operation

Video Input

Input Source Selection (Component, RGB Scart 1-pin)

Direct Operation

Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control Top Control

COMPUTER button

INPUT button

Menu Operation		Input Menu
1
	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and

then press the Point ► or SELECT button.

Use the Point ▲▼ buttons to select Computer 1 and then press the Point ► button.

3	Use the Point ▲▼ buttons to select Component or
	RGB(Scart) and then press the SELECT button.

RGB

RGB(PC digital)

Wired 1

Component

RGB (Scart)

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Component-VGA Cable, select Component.

When the input source is coming from video equipment connected to the COMPUTER IN 1/COMPONENT IN terminal with a Scart- VGA Cable, select RGB (Scart).

RGB RGB(PC digital)

Wired 1

Note:

•Network is for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to On1 or On, the input signal will be searched automatically (p.47).

0