Sanyo PLC-XU305A Video Input Video System Selection, AV System Menu Video or S-Video, Auto

Video Input

Video System Selection

1 Press the MENU button to display the On-Screen Menu. Use the Point ▲▼ buttons to select Input and then press the Point ► or SELECT button.

AV System Menu (Video or S-Video)

2	Use the Point ▲▼ buttons to select Video , S-videoor
	Computer 1(Component) and then press the Point ►
	or SELECT button.
3	Use the Point ▲▼ buttons to select System and then
	press the Point ► or SELECT button. Use the Point ▲

▼ buttons to select the desired system and then press SELECT button.

Video or S-Video

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-Mor PAL-N, select the system manually.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-Mand PAL-N.

Component AV System Menu (Component)

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

System Component

Note:

The AV System Menu cannot be selected when selecting

RGB (Scart).

41