La Crosse Technology WS-9013U instruction manual Iv. Daylight Saving Time Dst Setting, Mountain

4.Select your appropriate time zone using the “CH” button. During selection of the Time

Zone, the 3 letter EST;

abbreviations for the time				CST;
zones found		in	North
				MST;
America will flash across
				PST;
the top	of	the	TIME
LCD. Observe the			chart	ALA;
below,	showing		the	HAW;
corresponding

abbreviations, time zones, and codes.

Time Zones

GMT	0
Atlantic	-4
Eastern	-5
Central	-6
Mountain	-7
Pacific	-8
Alaska	-9
Hawaii	-10

Note: There are more time zones represented by numbers than there are represented by 3 letter abbreviations. If you live in North America you need only be concerned with the ones in the chart above.

5.Press and release the “SET” button to confirm and advance to the Daylight Saving Time setting.

IV. DAYLIGHT SAVING TIME (DST) SETTING

1.Press and hold the “SET” button for 3 seconds or until “12 h” or “24 h” flashes in the DATE LCD.

2.Press and release the “SET” button 2 more times to reach the

DST selection mode.

3. “DST 1” is the default setting and will be flashing in the

DATE LCD.

4. Press and release the “CH” button to select “DST 0” or “DST 1.”

5.“DST 0” indicates that the feature is off and the WWVB will not change times automatically. “DST 1” indicates that the feature is on and the WWVB will change times automatically.

Note: Some locations (Arizona and parts of Indiana) do not follow Daylight Saving Time and should select “DST 0.”

9