![WS-9228U-IT](/images/new-backgrounds/98053/980531x1.webp)
WS-9228U-IT
Wireless 915 MHz
Radio-controlled Weather Station
Instruction Manual
This product offers: | INSTANT TRANSMISSION is the state- | ||||
| |||||
| |||||
| technology, | exclusively designed | and | ||
| developed | by | LA | CROSSE | |
| TECHNOLOGY. |
| INSTANT | ||
| TRANSMISSION | offers | you | an |
immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in
INVENTORY OF CONTENTS
1.The Wireless Weather Station/ (Figure 1).
2.One remote temperature sensor with mounting bracket (Figure 2).
3.Two each, ½” Philips screws.
4.Instruction manual and warranty card.
Figure 1
TABLE OF CONTENTS
TopicPage
Inventory of Contents/Additional Equipment
About WWVB
Quick
Detailed
Battery installation
Program Mode
Program Sequence and Default Settings
Function Keys
Setting the LCD Contrast
Setting the Time Zone
Daylight Saving Time Setting
Setting the Time
Setting the Year, Day and Month
Setting the Snooze
Setting the Temperature Format
Setting the Forecast Sensitivity
Features
Weather Forecast Icons and Tendency Arrows
Indoor Temperature, Humidity, & Comfort
Level Indicator
Outdoor Temperatures and Humidity
Alarm Function (Setting Alarm 1 & 2) (Snooze & Silence)
Minimum & Maximum Records (Indoor,
Outdoor, & Resetting)
Additional Remote Control Sending Units
&Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information
2
ABOUT WWVB (Radio Controlled Time)
The NIST (National Institute of Standards and
QUICK
Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries.
1.Have the Wireless Weather Station and remote temperature sensor 3 to 5 feet apart.
2.Batteries should be out of both units for 10 minutes.
3.Place the batteries into the remote temperature sensor first then into the indoor weather station.
(All remote temperature sensors must be started before the Wireless Weather Station)
4.DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
In this time the Wireless Weather Station and remote temperature sensor will start to talk to each other and the display will show both the indoor temperature and humidity, and an outdoor temperature. If the Wireless Weather Station does not display both temperatures after the 15
Time LCD |
Date LCD |
Forecast LCD |
Indoor LCD |
Outdoor LCD |
Mounting | |
Bracket | temperature sensor |
Figure 2
minutes please retry the set up as stated above. After both indoor and outdoor temperatures are displayed for 15 minutes you can place your remote temperature sensor outdoor and set your time.
The remote temperature sensor should be placed in a dry, shaded area. The temperature sensor has a range of 330 feet. Keep in mind that the 330 feet is in open air with no obstructions and that radio waves DO NOT curve around objects. Actual transmission range will vary depending on what is in the path of the signal. Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.
Example: A Wireless Weather Station with a 330 feet range is mounted on an interior wall, so that the signal has to pass through one interior wall, one exterior wall, and across the 10 feet width of the room between the 2 walls. The first wall will reduce the range to 165 feet, and the second wall will reduce the range to 87 feet. Factoring in the 10 foot room, this leaves a maximum of 77 feet of remaining signal range.
ADDITIONAL EQUIPMENT (not included)
1.Two fresh AA 1.5V Alkaline batteries for the Wireless Weather Station.
2.Two fresh AA 1.5V Alkaline batteries for the remote temperature sensor.
3.One, Philips screwdriver for mounting.
This allowance is typically enough for a frame wall with
3 | 4 |