La Crosse Technology WT-2150A instruction manual Starting up the Alarm Clock

Starting up the Alarm Clock

The alarm clock uses 1 x AA LR6 battery (Alkaline recommended)

Snooze button

Function Keys Battery Compartment Battery Cover

1.Slide the battery cover off as indicated by the triangle to open the battery compartment.

2.Insert 1 x AA battery, observing polarity.

3.Replace battery cover.

4.Upon power-up, the alarm will sound once and all LCD segments will light up briefly.

5.The clock will now start searching for the WWVB time signal and the radio tower icon will flash to indicate signal reception attempt. Do not press any buttons at this time.

6.Reception typically takes 6-10 minutes during ideal reception time (nighttime hours) and will timeout after 10 minutes if no signal is found.

7.Upon successful reception, the time and date will be set to absolutely accurate time (default to Eastern time zone).

8.In the case of no reception keep in mind that for most locations reception during daylight hours is not possible. In this case, you may manually set the time or simply wait overnight.