absolutely correct time and date by the next morning. When a signal is received, the radio tower icon is displayed to the left of the US map. If no signal is received, there will be no tower icon.
Q: Why hasn’t my alarm clock picked up a signal?
A:
Q: Can I set the time and date without waiting for a signal?
A: Yes; simply follow the “Programming Mode” directions.
Q: How often does the alarm clock synchronize with the WWVB?
A:The Alarm Clock searches for a signal immediately after inserting a battery. After an initial signal is received, the alarm searches for a signal starting at 12:00 AM (midnight) every night and synchronizes at that time.
Q: After the clock set itself, why does it show the wrong hour?
A:The time zone is not set correctly. Look on the LCD map to see if the proper time zone is highlighted. If not, follow the “Programming Mode” section.
Q: What does “DST ON/OFF” mean?
A:Some parts of the country do not follow Daylight Savings Time (Arizona and parts of Indiana). Since the WWVB signal includes the correction for this, these areas must have the DST OFF.
Care and Maintenance
•Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and could give inaccurate readings.
•Use a soft, dry cloth to clean alarm clock. Do not use solvents as they may mark the LCD and case.
•Do not expose alarm to water or high humidity.
•Immediately remove low powered battery to avoid leakage and replace with one fresh AA LR6 battery.
•Do not attempt to repair your alarm clock.