La Crosse Technology WT-5720 instruction manual Projection of Time, LCD Light, Indoor Temperature

Models: WT-5720

1 18
Download 18 pages 30.8 Kb
Page 11
Image 11

C.Projection of Time

1.When plugged into an AC outlet, the projection alarm can continuously project the time.

2.When operating on batteries alone the projection alarm will only project when a button is pressed.

3.The projection will auto-focus for display from three to six feet away. A dark surrounding will be necessary to clearly see the projection.

4.The direction of the display can be rotated 360° in 90° increments by pressing the directional button. There is no display on the LCD that signifies the direction.

5.The projector case can be rotated 180° to further help orient the projected display.

6.The intensity of the projection can be adjusted to three different settings as well as turned “off” by pressing the light Intensity button. When turned off, the projection will only come on when a button is pressed. The intensity cannot be set for the projected display when set to “off”.

7.When only batteries are used, the intensity setting is set to “off” with no other options.

02'(



Light Intensity

Projection

 

Direction

D.LCD Light

1.The projection alarm has an LCD light designed for night viewing. This will light up for 2 seconds whenever a button is pressed.

2.The LCD light cannot be turned on constantly; this would drain the batteries and burn out the light.

E.Indoor Temperature

1.The projection alarm measures indoor temperature with an internal sensor.

2.This temperature is displayed in °F or °C, depending on the time format (12 or 24 hour mode). When in 12-hour format the temperature will be in °F. When in 24-hour mode the temperature will be in °C.

3.The indoor temperature will take time to adjust to the surrounding temperature as the sensor is inside the case.

11

Page 11
Image 11
La Crosse Technology WT-5720 instruction manual Projection of Time, LCD Light, Indoor Temperature