DISPLAY OPTIONS
Countdown Timer or Month/Date Display
CHANGE DISPLAY:
From Timer mode, stop the timer. Then press and hold the DATE/MEMO button to change from Timer to Date display.
NOTE: Date will show M/D when the clock is in
POSITIONING OR MOUNTING CLOCK
There are two possible ways to mount clock: use of the foldable table stands, or wall mounting.
FOLDABLE TABLE STANDS
The foldable table stands legs are located on the backside. Unfold the stands out, below the battery compartment. Once the foldout table stands are extended, place the clock in an appropriate location.
WALL MOUNTING
Install three mounting screws (not included) into a wall— leaving approximately 3/16 of an inch (5mm) extended from the wall. Place the clock onto the screws, using the three hanging holes on the backside. Gently pull the clock down to lock the screws into place.
NOTE: Always ensure that the clock locks onto the screws before releasing.
BATTERY REPLACEMENT
Low batteries should be changed to avoid the damage resulting from a leaking battery.
If you notice that the LCD appears faint or is not working properly, or the low battery symbol appears above the seconds, try a fresh AA alkaline battery before contacting customer support.
We recommend that you replace the batteries regularly to ensure optimum accuracy of this unit.
Help us to keep our environment clean. Please do not dispose of old electronic devices and empty batteries in household waste. To protect the environment, take them to your retail store or to appropriate collection
sites according to national or local regulations.
INTENDED USAGE AND SAFETY
∙Keep the instrument in a dry place.
∙Do not expose the instrument to extreme temperatures, vibration or shock.
∙Clean it with a soft damp cloth. Do not use solvents or scouring agents.
∙If the unit does not work properly, change the battery.
∙The product is not a toy. Keep it out of reach of children.
∙The product is not to be used for medical purpose or for public information, but is determined for home use only.
∙The specifications of this product may change without prior notice.
∙Improper use or unauthorized opening of housing will void the warranty.
SPECIFICATIONS:
Indoor Temperature Range: 14.4°F to 99.9°F
outside this range. |
|
Resolution: | 0.2°F (0.1 °C) |
Measuring Period: | Every 60 seconds. |
Battery: | Requires 1 x LR6 (AA) alkaline battery (not |
included). |
|
Clock Size: | 9.23 L x 7.61 H x 1.04 inches W (234.4 L x 193.4 H |
x 26.3mm W) |
|
Time Display: | Numbers are 1.77 inches H (4.5 cm) |
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference.. This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do not allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Online: www.lacrossetechnology.com/support
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged.
EJMA8100L210
Printed in China
2
