WT-8100 TIMER WALL CLOCK
Quick Setup Manual
The Wall Clock with Timer is ideal for your kitchen, and fitness room.
Displays time, weekday, indoor temperature and a timer all on one easy to read
display.
∙ACTIVATE/DEACTIVATE ALARM: Press and release the ALARM button to activate or deactivate the alarm. When the alarm is active the clock displays
the alarm icon 
above the seconds. When deactivated, the alarm icon 
does not display.
∙ALARM SOUND: The Alarm frequency is 2KHz for 90 seconds:
The alarm sound pattern is one beep every 2 seconds for 30 seconds, then one beep every 1 second for 30seconds and then one beep every 2 seconds for 30 seconds and stop.
SNOOZE: When the time alarm sounds, press and release the DATE/MEMO button to activate the Snooze feature for 10 minutes. The alarm icon will flash when the snooze feature is activated. Press and release the + button to deactivate the snooze function.
FEATURES
∙Digital time
∙Date display.
∙Weekday display in 4 languages: English, French, German or Spanish.
∙Indoor temperature (°F or °C)
∙12/24 hour time display.
∙Time Alarm with snooze.
∙Wall hanging or free standing.
∙Countdown/Count up Timer with
∙Low battery indicator.
∙Temperature range: 14.4°F to 99.9°F
∙Requires
| Hanging |
| holes |
LCD | Battery |
compartment | |
display |
|
Function | Foldable |
buttons | stands |
COUNTDOWN TIMER
SET TIMER:
Press and release the TIMER/SNZ button to enter the timer set mode. You will see this in the lower
∙TIMER MINUTES: Press and release the TIMER/MIN button to adjust the Minutes. Hold the TIMER/MIN button to change the Minutes quickly. Minutes can be set from
∙TIMER SECONDS: Press and release the TIMER/SEC button to adjust the Seconds. Hold the TIMER/SEC button to change the Seconds quickly. Seconds can be set from
∙START OR STOP TIMER: Press and release the START/STOP button to begin the timer countdown to 0:00. Press and release the START/STOP button to stop the timer.
∙TIMER ALARM: When the countdown timer reaches 0:00, the alarm will sound one beep every 0.5 seconds for 30 seconds.
∙EXIT TIMER MODE: Press and hold the TIMER/MEMO button for 2 seconds to exit Timer mode. The date will be displayed.
INITIAL SET UP
Install battery:
∙The Wall Clock uses 1 x AA battery (IEC LR6, 1.5V).
∙Insert battery into the Wall Clock, observing the correct polarity (see markings inside battery compartment).
∙Set Time and Date.
TIMER / SNZ button | START / STOP button | |
ALARM | ||
DATE / MEMO |
| |
TIMER/ MIN Button | TIMER/ SEC button | |
SET | ||
+ | ||
|
SET TIME
Press and hold SET button for 5 seconds, to enter the time set mode.
CREATE TIMER MEMORY:
The Timer can be manually set (see set timer) or you can create up to eight different timers in memory, which can be recalled and reused. From a normal display, press and release the TIMER/MEMO button to enter timer mode.
∙COUNT UP TIMER: In Timer mode press and release the START/STOP button to begin counting up from 0:00. Press and release the START/STOP button to stop the count up.
Press and release the START/STOP button to start the count down, then again to stop the count down before it reaches 0:00 and the timer sounds. This will commit the timer to memory.
∙COUNTDOWN TIMER: Set a countdown timer (see set timer) or select one from memory. Press and release the START/STOP button to begin counting down. Press and release the
START/STOP button to stop the count down before it reaches 0:00 and the timer sounds. This will commit the timer to memory.
∙
NOTE: The date will display as Month/Day in
∙HOUR: The Hour will flash. Press and release the + button to adjust the Hours. Be sure to AM or PM is showing as appropriate. Press and release the SET button.
∙MINUTES: The Minutes will flash. Press and release the + button to adjust the Minutes. Hold the + button to change the Minutes quickly. Press and release the SET button.
YEAR: The Year will flash. Press and release the + button to adjust the Year. Press and release the SET button.
∙MONTH: The Month will flash. Press and release the + button to adjust the Month. Press and release the SET button.
∙DATE: The Date will flash. Press and release the + button to adjust the Date. Press and release the SET button.
∙NOTE: Day of the Week will set automatically.
∙FAHRENHEIT/CELSIUS: °F will flash. Press and release the + button to switch to °C. Press and release the SET button again.
∙LANGUAGE: US (English) will flash. Press and release the + button to change to French (F), Spanish (E), German (d) or back to English (US). Press and release the SET button to finish.
SET TIME ALARM
Press and hold the ALARM button for 5 seconds to enter the alarm set mode.
∙HOUR: The Hour will flash. Press and release the + button to adjust the Hours. Be sure the AM or PM is showing as appropriate. Press and release the ALARM button.
∙MINUTES: The Minutes will flash. Press and release the + button to adjust the Minutes. Hold the + button to change the Minutes quickly. Press and release the DATE/MEMO button and you are done.
∙RECALL TIMER MEMORY: In timer mode press and release the TIMER/SNZbutton to recall a saved time memory.
NOTE: The timer will recall the time memory in ascending order rather than
order saved. Example: Saved time memories are 7:00, 6:00, & 23:00. Recall will be 6:00, 7:00, & 23:00.
∙RECALL SEARCH: Press TIMER/SNZ button to recall timer memory, it will search from the smallest timer memory to find timer larger than existing timer value and recall it.
Example: Set timer to 6:30, then press TIMER/SNZ button to recall the memory. It will search the memory recall order 6:00, 7:00 & 23:00 and recall 7:00 as the next largest memory.
∙TIMER MEMORY OVERWRITE: A time memory is created each time the countdown timer is started then stopped before the timer reaches 0:00 and sounds the alarm.
A maximum of 8 count down time memories can be save and recalled, when count down memory is full, it will delete the oldest timer and add the new timer, in
∙CLEAR TIMER: In timer mode, with the timer stopped, press and hold the TIMER/MIN button and TIMER/SEC button together for 5 seconds to clear the oldest timer to 0:00.
∙EXIT TIMER MODE: Press and hold the TIMER/SNZ button for 2 seconds to exit Timer mode. The date will be displayed.
1
