TROUBLESHOOTING GUIDE
The machine is provided with a program of
Message | Description | Probable cause |
|
|
|
ERR. | during the | Fuses, |
| received the change of state of the | switch, electronic board. |
| micro switch. |
|
|
|
|
ERROR ARM 0 | The electronic board has not received the “sugar | Fuses, cup blocked in the |
| position” of the cup | motor, position sensor, electronic board. |
| sensor on the |
|
|
|
|
ERROR ARM 1 | The electronic board has not received the “cup | Fuses, cup blocked in the |
| position” of the cup | motor, position sensor, electronic board. |
| sensor on the |
|
|
|
|
ERROR ARM 2 | The electronic board has not received the | Fuses, cup blocked in the |
| “supply position” of the cup | motor, position sensor, electronic board. |
| relative sensor on the |
|
|
|
|
ERROR GROUP 1 | the | Fuses, group right micro switch, group motor, |
| position” given by its right micro switch. | electronic board. |
|
|
|
ERROR GROUP 0 | the | Fuses, group left micro switch, group motor, |
| position” given by its left micro switch. | electronic board. |
|
|
|
ERR. COFFEE FLOW | During espresso supplying, the board has not | Fuses, too finer coffee, coffee pump, coffee |
| received signals from the flowmeter. | electro valve, flowmeter, electronic board. |
|
|
|
ERR. SOLUB.FLOW | During soluble supplying, the board has not | Fuses, solubile pump, solubile electro valve, |
| received signals from the flowmeter. | flowmeter, electronic board. |
|
|
|
ERROR GRINDER 1 | During the coffee grinding, the board has not | Too fine coffee, fuses, doser |
| received the signal given by the | grinder motor, grinder blocked by something |
| the maximum time of 25 seconds. | hard, electronic board. |
|
|
|
LACK OF CUPS | The board doesn’t receive the signal from the | Lack of cups, cups sensor, electronic board. |
| cups sensor. |
|
|
|
|
LACK OF WATER | The board doesn’t receive the signal from the | Lack of water, float, water container micro |
| float. | switch, electronic board. |
|
|
|
ERROR BOILER 1 | The board has not received the programmed | Safety thermostat, boiler heating element, |
| value temperature from the boiler probe in the | electronic board. |
| maximum time of 15 minutes. |
|
|
|
|
EMPTY GROUNDS! | The coffee grounds decounter has reached the | Empty the grounds and execute the quick |
| programmed value. | function nr.5. |
|
|
|
ERROR EXECUTIVE | At the | Payement system, cables, electronic board.. |
| signals by the payment payment, Executive or |
|
| MDB, programmed. |
|
|
|
|
HYDRAULIC CONNECTION
INSIDE TANK
The machine is already set for the inside tank working.
WATER SYSTEM CONNECTION (OPTIONAL)
∙disconnect the silicon pipe, which comes from the tank, from the limestone filter.
∙connect the silicon pipe coming from the water resevoir to the filter.
∙connect the connector with the two grey wires coming from the water reser- voir to the connector with two grey wires of the machine.
∙disconnect the wires of the float and connect the black and green wires com- ing from the water reservoir to the black and green wires into the machine.
∙check that the
∙Connect the water inlet tube to the inlet electrovalve with a ¾ " fitting.
Pag. 28 | Pag. 5 |