LaCie 319 LCD Monitor | 3.1 Controls |
User’s Manual | page 18 |
|
|
Color Control Systems
These options provide manual access to certain settings that influence the colorimetric behavior of your display. If you are per- forming
Color Control Systems: Seven color presets select the desired color setting (sRGB, NATIVE and PROGRAMMABLE
color presets are standard and cannot be changed). Color temperature increases or decreases, in each preset. Please do not modify manually if you are performing
R,Y,G,C,B,M,S: Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation depending upon which is selected. The change in color will appear on screen and the direction (increase or decrease) will be shown by the color bars. Please do not modify manually if you are performing
NATIVE: Original color presented by the LCD panel that is unadjustable.
PROGRAMMABLE: This mode is automatically activated by the LaCie blue eye pro calibration software to perform hardware calibration of the display.
NOTE: To reset a poor image setting, turn on the monitor by using front power button while holding “EXIT” and “SELECT” buttons at the same time.
Tools 1
SHARPNESS: This function is digitally capable to keep crisp image at any timings. It is continuously adjustable to get distinct image or soft one as you prefer, and set independently by different timings.
EXPANSION MODE: Sets the zoom method.
FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.00 to 3.00 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.
CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.00 to 3.00 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION) direction by 0.01 step.