
Slim DVD±RW
Quick Install Guide
Box Content
1.Primary USB 2.0 A plug (signal and power)
2.Secondary USB 2.0 A plug (power only)
3.
Note: Please find the User Manual on the CD.
Protect your investment – register for free technical support at www.lacie.com/register
Setup Steps
1.Connect the primary USB 2.0 A plug (without the lightning bolt sticker) to your computer.
2. Your drive is ready to use.
Windows users: Right click My Computer and select Properties>General. Your drive should be listed. Mac users: In the Apple menu, choose About This Mac, then More Info. This will open the Apple System Profiler. Your drive should be listed under the Hardware category.
NOTE: Your drive must be connected to a USB 2.0 port. Performance is not guaranteed using USB 1.1.
NOTE: The Y cable has a secondary USB 2.0 A plug for additional power. Attaching the primary A plug to most computers will provide ample signal and power for the LaCie Slim DVD±RW. In the event that the device does not receive enough power, you may connect the additional A plug into a second USB 2.0 port on your computer. Please note that the secondary plug has a lightning bolt sticker.
See the User Manual for more information.