Back Screen & Head Rest
Assembly Instructions
For 4220ST and 4420ST Trekers | Manual No. | ||
|
|
|
|
Before You Start
When you see this symbol, the subsequent
!instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!
IMPORTANT: Before you begin, read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Your Back Screen & Head Rest is exclusively designed for the Heavy Duty
A separate Parts Manual for replacement parts can be purchased from your dealer or available free of charge at www.landpride.com. Have model and serial numbers handy when placing an order.
Manual Part Numbers:•Operator’s Manual (4220/4420 ST) . . . .
•Parts Manual (4220/4420 ST) . . . . . . . .
Further Assistance
Your dealer wants you to be satisfied with your new Treker. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:
1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.
3.For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks.
lpservicedept@landpride.com
General Information
These assembly instructions apply to the following Back Screen and Head Rest accessories listed below:
701-167A BACKSCREEN, TREKER
701-165A HEADREST KIT, FOR BACKSCREEN
Tools required:
•Safety Glasses
•Work Gloves
•Two 7/16" box end or open end wrenches
•Two 1/2" box end or open end wrenches
Assembly Instructions
A detailed listing of parts for each accessory kit is provided on page 2. Use the list that is for your kit as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.
Initial Preparations
Before servicing the vehicle the following procedure must be met to secure the vehicle:
1.Park vehicle on a level surface. Don’t work under or around a vehicle parked on an incline.
2.Set shift selector in Park.
3.Turn ignition switch off and remove switch key.
4.Chock front and back of a wheel to prevent the vehicle from rolling.
© Copyright 2005 | Pr inted | 11/28/06 | 1 |