Land Pride
Assembly Instructions
Kit No. | BACKSCREEN, TREKER |
|
|
Back Screen Assembly | 24816 | ||||
Refer to Figure 1: |
|
| |||
1. | Install bottom joint halves (#1) to the |
| |||
| Accessory Bar lower back cross member with |
| |||
|
| ||||
| washers (#5) and nylock hex nut (#4). Do not |
| |||
| tighten nylock nuts. |
|
| ||
2. | Install top joint halves (#1) to the |
| |||
| Accessory Bar upper back cross member with |
| |||
|
| ||||
| washers (#5) and nylock hex nuts (#4). Do not |
| |||
| tighten nylock nuts. |
|
| ||
3. | Insert back screen (#2) into the bottom joint |
| |||
| halves and then into the top joint halves. |
| |||
4. | Adjust joint halves to center back screen on the |
| |||
|
|
| |||
5. | Tighten nylock nuts to 8 |
| |||
Item | Qty. | Part No. | Part Description |
|
Back Screen Assembly
1 | 8 | JOINT PLATE | Figure 1 | ||
2 | 1 | WELDMENT, BACKSCREEN | |||
| |||||
3 | 4 | HHCS |
| ||
4 | 4 | NUT HEX NYLOCK |
| ||
5 | 8 | WASHER FLAT 1/4 SAE PLT |
| ||
| 8 | EDGE TRIM 1/8X7/16 - 75 SERIES |
| ||
| 1 | MANUAL, ST TRUCK BACKSCREEN |
|
Kit No. | HEADREST KIT, FOR BACKSCREEN |
|
|
Head Rest Assembly
Refer to Figure 2:
1.Locate a desirable height and horizontal position that will protect the driver and passenger heads.
2.Attach headrests (#4) to the back screen with backing plates (#1),
3.Tighten cap screws to 11
Item Qty. Part No. Part Description
24817 |
1 | 2 | PLATE, HEAD REST BACKING | |
2 | 4 | HHCS | |
3 | 4 | WASHER FLAT 5/16 SAE PLT | |
4 | 2 | HEADREST W/HARDWARE (Includes items 2 & 3) | |
| 1 | MANUAL, ST TRUCK BACKSCREEN |
Headrest Assembly
Figure 2
2 | Manual No. | ■ 11/28/06 |