All-Purpose Seeder
The perfect tool for any landscaper.
We know seeders, and our new
This
APS Series
Cat. 1 — 4’ 6’
•All welded seedbox construction
•Watertight lid to keep seed dry
•Single lever for adjusting front rollers
NEW SEEDINGWhile seeding into a freshly prepared site, the front angling rollers help cut through the top crust, kicking up a light amount of soil, making sure the ground is soft. The seed is then dropped, and compressed by the rear roller. Establishing this initial seed to soil contact is essential in achieving a high rate of germination.
The
the front rollers are adjustable to various levels of aggressiveness.
By adjusting the front two rollers, you can control how aggressive
you want to be in the existing turf you are overseeding. If the 7 existing turf is fairly sparse, go light on the angle of the rollers so
some dirt is kicked up, but the existing turf is not torn up. If the existing turf is thick, the front two rollers can be set quite aggressive to work through thatch and dead grass build up, allowing the seed to drop closer to the soil.
We’ve incorporated many of | QUALITY LAND PRIDE FEATURES |
| ||
| all of the time. This results in excellent accuracy, |
| ||
|
| |||
our standard seeding features |
|
| ||
| and money saving efficiency. |
| ||
into the |
|
| ||
| Rollers – The heat treated steel spikes |
| ||
Seedbox – The all welded |
|
| ||
| engage the ground to keep the rollers turning, |
| ||
seedbox creates strength for |
|
| ||
| agitate the soil, aerate existing turf, promote |
| ||
the seeder. The watertight |
|
| ||
| seed to soil contact, and then the rear roller |
| ||
lid helps keep the elements |
|
| ||
| compresses the soil. |
| ||
out and your seed dry. The |
|
| ||
| Spring Loaded Rear Roller – The spring loaded rear roller ensures | |||
seedbox also has a seed | ||||
that the roller will stay on the ground, even in rough conditions. | ||||
splashplate to keep seed out of the hinge area of the lid. A paddle | ||||
With the rear roller being connected directly to the seed cups, it is | ||||
type agitator is also included in the seedbox to keep seed from | ||||
important that it is not interrupted so to minimize seeding skips. By | ||||
bridging, and allowing an uninterrupted flow to the seed cups. At | ||||
being spring loaded, the possibility of skips is greatly diminished. | ||||
one bushel per foot, the capacity is just right for landscaping size | ||||
|
|
projects. | Lift Hooks – Lift Hooks are | |
Seed cups – We’ve been using our seed cups on seeders and | conveniently located on both | |
sides of the seedbox to aid in | ||
grain drills for many years. This cup is the standard of the seeding | ||
lifting the seeder on and off | ||
industry, and you can easily see why when you look at the fluted | ||
the trailer. | ||
metering device and see how it grabs the same amount of seed | ||
|