Manuals / Land Pride / Lawn and Garden / Lawn Mower

Land Pride FD2548 manual Leveling the Mower, Front to Rear, Side to Side

Models: FD2548

1 30
Download 30 pages 25.8 Kb
Page 7
Image 7

1/29/04

LEVELING THE MOWER

THREE AND FOUR GAUGE WHEELS

NOTE: Tractor and mower should be on level ground.

1.Set lower hitches and upper floating hitch, as shown in fig. 1 on page 5.

2.Start tractor and raise mower, watching that tractor draw bar (if not removed) does not interfere with mower.

3.Slowly lower the mower until gauge wheels touch the ground and the lower mower 3-point hitch bars are par- allel to the ground in floating position. Set tractor 3- point stop.

4.Set park brake and turn off tractor. Remove key from ignition.

5.Adjust the tractor top link in or out to place the upper hitch pin vertically above the lower hitch pin as shown in fig. 1 on page 5, to allow mower flotation.

6.Rotate blades parallel to direction of travel.

7.Measure the clearance from the cutting edge to the ground at front and rear of the blade. This measure- ment should be equal or have the blade at the front of the mower not more than 1/2" lower than the blade at the rear of the mower.

TWO REAR GAUGE WHEELS IN REAR AND SUPPORT CHAINS

FRONT TO REAR:

NOTE: Tractor and mower should be on level ground.

1.Set the lower hitches and upper floating hitch as shown in fig. 1 on page 5.

2.Start tractor and raise mower, watching that tractor draw bar (if not removed) does not interfere with mower.

3.Slowly lower mower until gauge wheels touch the ground and with mower deck close to level.

4.Set part brake and turn off tractor. Remove key from ignition.

5.Rotate mower blades parallel to direction of travel. Measure cutting edge to ground clearance on each side of the mower.

6.Measure the clearance from the cutting edge to the ground at front and rear of the blade. This measure- ment should be equal or have the blade at the front of the mower not more than 1/2" lower than the blade at the rear of the mower.

7.Use tractor 3-point top link to level the blade front to back. Set tractor control when level.

8.Adjust lift chains to be tight by placing chains into slots on lower chain brackets. Be sure to connect the same link on both sides. Install plastic plugs. Secure excess chain links together with the two tie straps in- cluded.

SIDE TO SIDE:

1.Set lower hitches and upper floating hitch at desired setting as shown in fig. 1 on page 5.

2.Start tractor and raise mower, watching that tractor draw bar (if not removed) does not interfere with mower.

3.Slowly lower the mower until gauge wheels touch the ground.

4.Set park brake and turn off tractor.

5.With discharge chute hinged out of the way, rotate blade 90 degrees to direction of travel. If unequal, ad- just one lower lift link of tractor 3-point hitch to level mower.

6.Adjust lift chains to be tight by placing chains into slots on lower chain brackets. Be sure to connect the same link on both sides. Install chain connector. Se- cure excess chain links together with the two tie straps included.

6

Page 6 Page 8
Page 7
Image 7
Land Pride FD2548 manual Leveling the Mower, Front to Rear, Side to Side
Page 6 Page 8

FD2548 specifications

The Land Pride FD2548 is a robust and dependable flail mower designed for professional landscaping, agriculture, and non-commercial use. This mower stands out for its ability to handle a variety of mowing applications with efficiency and precision. Boasting a cutting width of 48 inches, the FD2548 is engineered to tackle tough vegetation and maintain a clean finish across diverse terrains.

One of the main features of the Land Pride FD2548 is its heavy-duty construction. It is built with high-quality materials, ensuring durability and longevity even under rigorous conditions. The mower is equipped with a rugged frame that provides stability and strength during operation. The rotating flail blades are particularly noteworthy; they are designed to efficiently chop through dense grass, weeds, and brush, making it an ideal choice for overgrown areas.

The FD2548 incorporates advanced mower technology to enhance cutting performance. Its flail blade system utilizes multiple blades that rotate around a horizontal shaft, delivering a finely shredded finish that decomposes quickly, enriching the soil. The blades are replaceable, allowing users to easily maintain optimal performance and efficiency. This mower also features adjustable cutting height settings, providing flexibility to achieve the desired grass length while accommodating various landscaping needs.

Another characteristic that sets the Land Pride FD2548 apart is its compatibility with multiple tractor models. It features a category 1 quick hitch system, allowing for easy attachment and detachment without the need for additional tools. This versatility makes it a favorite among farmers, landscapers, and large property owners, enabling users to switch between implements quickly and efficiently.

Additionally, the FD2548 is designed with operator safety in mind. It includes features such as a rear discharge design that prevents clippings from being ejected towards the operator, ensuring a safer working environment. The mower is also relatively easy to service, with accessible grease fittings and a user-friendly design that simplifies routine maintenance.

In summary, the Land Pride FD2548 flail mower excels in durability, versatility, and cutting performance. Its heavy-duty construction, advanced flail technology, adjustable height settings, and safety features make it an excellent choice for anyone looking to maintain their property effectively and efficiently. Whether you're managing a large farm or tending to a residential landscape, the FD2548 is engineered to deliver results with reliability and precision.