Land Pride FD2548 manual NUT & Bolt Torquing Chart, Tractor Requirements, Gear BOX Gear Lube

Models: FD2548

1 30
Download 30 pages 25.8 Kb
Page 5
Image 5

1/29/04

NUT & BOLT TORQUING CHART

This chart is based on torque requirements in foot pounds for grade 5 bolts.

BOLT DIAMETER

MINIMUM TORQUE

MAXIMUM TORQUE

BOLT DIAMETER

MINIMUM TORQUE

MAXIMUM TORQUE

1/4"

9

11

3/4"

270

324

5/16"

17

20

7/8"

400

480

3/8"

35

42

1"

580

696

7/16"

54

64

1 1/8"

800

880

1/2"

80

96

1 1/4"

1120

1240

9/16"

110

132

1 3/8"

1460

1680

5/8"

150

180

1 1/2"

1940

2200

NOTE: Torque requirements listed above do not apply to self-locking nuts. For self-locking nuts increase torque requirements listed above by 15%.

TRACTOR REQUIREMENTS

This mower is designed with a 3-Point category I hitch. Horse power rating of tractor should not exceed 26 PTO horse power.

NOTE: In order to maintain steering control, ballast may have to be added to your tractor. To determine whether or not to add ballast, refer to your tractor operator’s man- ual.

!CAUTION! DO NOT OVER SPEED PTO OR MACHINE DAMAGE MAY RESULT. THIS MOWER IS DESIGNED TO BE USED WITH A TRACTOR USING A 540 RPM REAR PTO.

GEAR BOX GEAR LUBE

Before operating this unit, 80-90 EP Gear Lube must be added to the gearbox(s) as indicated in the maintenance lubrication section (Page 9) of this manual. See your Land Pride Dealer for part number 821-012C Gear Lube.

ASSEMBLY INSTRUCTIONS

Your 25 Series Grooming Mower is shipped to you almost completely assembled. Remove the protective plastic wrap from the mower deck. Using a safe lifting device, set the mower deck on a safe supporting stand. Remove loose components - gauge wheels, gauge wheel arms and miscellaneous hardware from the top of deck. Carefully follow the instructions below for final assembly.

UPPER HITCH ARMS -

Refer to the parts illustration on page 14:

1.Loosen 5/8" x 1 1/2" long bolts (#18) and swing up- per hitch (#21) up to a vertical position. Remove 5/8" x 5" long bolt (#25) and install upper hitch brace (#22) up- per pivoting hitch (#23) and hitch spacer (#24) with 5/8" x 5" long bolt (#25) as shown in parts illustration. Refer to Fig. 1 on page 5, for bolting location of upper hitch brace (#22) and tighten hardware to listed torque above.

GAUGE WHEEL ASSEMBLY - 2 FRONT GAUGE WHEELS & 4 GAUGE WHEEL ASSEMBLY

Refer to the parts illustration on page 22:

1.Bolt the gauge wheel arms (#1)-front gauge wheel (#17)-rear gauge wheel, to the mounting channels on the mower frame using 3/8" x 3" long bolt (#13).

2.Insert the 1" diameter shaft of the gauge wheel yoke (#6) into the bushings on the gauge wheel arm, noting the amount of spacers added to top or bottom depend- ing on cutting height (see "Cutting Height Adjustments"

on page 7). Secure shaft to wheel arm with 1/4" lock pin (#5). Be sure all the spacers are arranged the same on each wheel assembly. Tighten all hardware to listed torque.

GAUGE WHEEL ASSEMBLY - 3 GAUGE WHEEL AS- SEMBLY

Refer to the parts illustration on page 22:

1.Bolt the gauge wheel arms (#1) to the mounting

channels on the mower frame using 3/8" x 3" long bolt (#13).

2.Rear Single Gauge Wheel: Bolt the gauge wheel arm (#18) to the mounting channels of the mower frame using 3/8" x 1 1/4" Long Bolts (#19).

3.Insert the 1" diameter shaft of the gauge wheel yoke (#6) into the bushings on the gauge wheel arm, noting the amount of spacers added to top or bottom depend- ing on cutting height (see "Cutting Height Adjustments" on page 7). Secure shaft to wheel arm with 1/4" lock pin (#5). Be sure all the spacers are arranged the same on each wheel assembly. Tighten all hardware to listed torque.

4

Page 5
Image 5
Land Pride FD2548 manual NUT & Bolt Torquing Chart, Tractor Requirements, Gear BOX Gear Lube, Assembly Instructions

FD2548 specifications

The Land Pride FD2548 is a robust and dependable flail mower designed for professional landscaping, agriculture, and non-commercial use. This mower stands out for its ability to handle a variety of mowing applications with efficiency and precision. Boasting a cutting width of 48 inches, the FD2548 is engineered to tackle tough vegetation and maintain a clean finish across diverse terrains.

One of the main features of the Land Pride FD2548 is its heavy-duty construction. It is built with high-quality materials, ensuring durability and longevity even under rigorous conditions. The mower is equipped with a rugged frame that provides stability and strength during operation. The rotating flail blades are particularly noteworthy; they are designed to efficiently chop through dense grass, weeds, and brush, making it an ideal choice for overgrown areas.

The FD2548 incorporates advanced mower technology to enhance cutting performance. Its flail blade system utilizes multiple blades that rotate around a horizontal shaft, delivering a finely shredded finish that decomposes quickly, enriching the soil. The blades are replaceable, allowing users to easily maintain optimal performance and efficiency. This mower also features adjustable cutting height settings, providing flexibility to achieve the desired grass length while accommodating various landscaping needs.

Another characteristic that sets the Land Pride FD2548 apart is its compatibility with multiple tractor models. It features a category 1 quick hitch system, allowing for easy attachment and detachment without the need for additional tools. This versatility makes it a favorite among farmers, landscapers, and large property owners, enabling users to switch between implements quickly and efficiently.

Additionally, the FD2548 is designed with operator safety in mind. It includes features such as a rear discharge design that prevents clippings from being ejected towards the operator, ensuring a safer working environment. The mower is also relatively easy to service, with accessible grease fittings and a user-friendly design that simplifies routine maintenance.

In summary, the Land Pride FD2548 flail mower excels in durability, versatility, and cutting performance. Its heavy-duty construction, advanced flail technology, adjustable height settings, and safety features make it an excellent choice for anyone looking to maintain their property effectively and efficiently. Whether you're managing a large farm or tending to a residential landscape, the FD2548 is engineered to deliver results with reliability and precision.