Land Pride PF10, PF20 !

1

Important Safety Information

1/28/08 PF10 & PF20 Pallet Forks 319-033M

Land Pride Table of Contents

Important Safety Information

▲

These are common practices that may or may not be applicable to the products described in

this manual.

!Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personalsafety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and conﬁguration of

equipment, hazard control and accident prevention

are dependent upon the awareness, concern,

prudence and propertraining of personnel involved in

the operation, transport, maintenance and storage of

equipment.

Be Aware of

Signal Words

A Signal word designates a degree or

level of hazard seriousness. The

signal words are:

Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury. This

signal word is limited to the most

extreme situations, typically for

machine components that, for

functional purposes, cannot be

guarded.

!DANGER

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury, and

includes hazards that are exposed

when guards are removed.It may also

be used to alert against unsafe

practices.

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury. It

may also be used to alert against

unsafe practices.

!WARNING

!CAUTION

For Your Protection

▲Thoroughly read and understand

the “SafetyLabel” section, read all

instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put

tractor in park, turn off engine, and

remove the key.

▲Detach and store implements in a

area where children normally do

not play. Secure implement by

using blocks and supports.

OFF

REMOVE

Safety at All Times

Thoroughly read and understand

the instructions given in this

manual before operation. Refer to

the “Safety Label” section, read

all instructions noted on them.

Do not allow anyone to operate

this equipment who has not fully

read and comprehended this

manual and who has not been

properly trained in the safe

operation of the equipment.

▲Operator should be familiar with

all functions of the unit.

▲Make sure all guards and shields

are in place and secured before

operating the implement.

▲Never operate tractor/Skid Steer

controls from the ground. Always

sit in the operator’s seat when

activating the controls.

▲Keep bystanders away from

tractor/Skid Steer and work area.

Do not raise the lift arms and

attachment over another worker.

▲Never carry riders or use tractor/

Skid Steer to lift people.

▲Do not leave tractor/Skid Steer or

implement unattended with

engine running.

▲Travel up and down slopes, not

across them.

▲Do not dismounting from a

moving tractor/Skid Steer. This

can cause serious injury or death.

▲Do not stand between the tractor/

Skid Steer and implement during

hitching.

▲Keep hands and feet on controls

or footrests. Never lean out the

front of the cab with the engine

running.

▲Keep hands, feet, and clothing

away from power-driven parts.

▲Wearsnug ﬁtting clothing to avoid

entanglement with moving parts.

▲Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.