![Storage](/images/new-backgrounds/88879/8887943x1.webp)
Table of Contents
Section 4: Maintenance & Lubrication
Storage
At the end of the working season or when the Powered Rake will not be used for a long period, it is good practice to clean off any dirt or grease that may have accumulated on any of the moving parts.
Check roller studs for wear and replace if necessary.
Inspect Powered Rake for loose, damaged or worn parts. Adjust and tighten loose parts or replace if needed.
Lubricate as noted in “Lubrication” on page 21.
Repaint parts where paint is worn or scratched to prevent rust.
Drain gearbox and chain case oil. Drain oil in gearbox by removing bottom drain plug. Drain oil in chain case by removing large cover (#1) Figure
Apply a light coat of grease to any exposed hydraulic cylinder rods.
Store Powered Rake in a clean, dry place.
Land Pride
20 PR1660, PR1672 & PR1690 Powered Rakes | 10/20/06 |