Table of Contents

Section 2: Operating

Land Pride

Operating Check List

Hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training involved in the operation, transport, maintenance and storage of the Powered Rake. Therefore, it is absolutely essential that no one operates the Powered Rake without first having read, fully understood and become totally familiar with the Operator’s Manual. Make sure the operator has paid particular attention to:

Important Safety Information, pages 1 to 6

Section 1: Assembly and Set-Up,page 9

Section 2: Operating, page 12

Section 3: Adjustments, page 14

Section 4: Maintenance & Lubrication, page 16

Before beginning to operate your Powered Rake the following inspection should be performed.

Operating Checklist

Check

Ref Pages

 

 

 

 

Make sure all guards and shields are in place and

1

 

secured.

 

 

 

 

 

Read all of the Hook Up instructions.

9 to 11

 

 

 

 

Read “Operating Instructions”

12

 

 

 

 

Check chain tension.

15

 

Check chain tension.

18

 

Refer to “Drive Chain Adjustment”.

 

 

 

 

 

Grease driveline shaft and other grease fittings.

21

 

 

 

 

Check oil level in gearbox and chain case.

22

 

 

 

 

Make certain that all oil plugs have been replaced

22

 

properly in both the gearbox and chain case.

 

 

 

 

 

Check initially and periodically for loose bolts &

26

 

pins, and chains. Refer to Torque Values Chart.

 

 

 

 

 

Check air pressure in gauge wheel tires.

26

 

 

 

Make the following inspections after attaching the Powered Rake to the tractor. Make certain the PTO is disengaged and completely stopped before continuing.

1.Inspect tractor safety equipment to make sure it is in good working condition.

2.Carefully raise and lower the implement with the Powered Rake set at the maximum 15 degree angle to ensure that the drawbar, tires, and other equipment on the tractor do not contact the frame or PTO driveline.

3.Check all hoses and wires to be sure that they will not contact PTO driveline. Check PTO guards to make certain they are in good condition and in place.

4.Inspect hydraulic hoses for wear, damage and hydraulic leaks. See “Avoid High Pressure Fluids Hazard” on page 3. Replace damaged and worn hoses with genuine Land Pride parts.

5.Set tractor throttle to idle or slightly above idle and slowly engage the PTO. Once the Powered Rake is running smoothly, increase tractor PTO speed to the rated PTO speed. Stop PTO rotation immediately if vibration occurs. Wait for the PTO to come to a complete stop and then dismount from the tractor to check for probable causes.

IMPORTANT: Do not exceed 540 RPM rated PTO speed. Excessive engine speed will cause damage to the power train components.

Transporting

IMPORTANT: ALWAYS disengage PTO before raising the Powered Rake to transport position.

1.Be sure that the driveline does not contact tractor or Powered Rake when raising the Powered Rake to the transport position.

2.Be sure to reduce tractor ground speed when turning; and to leave enough clearance between the Powered Rake and other obstacles such as buildings, trees or fences to prevent damage from contacting them.

3.Select a safe ground speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.

4.Shift tractor to a lower gear when traveling over rough or hilly terrain.

!CAUTION

Use accessory lights and other devices for adequate warning to operators of other vehicles when traveling on public roads at all times during the day and night. Comply with all federal, state and local laws.

Operating Instructions

!CAUTION

Keep bystanders at least 20 feet away when operating!

!DANGER

Do not operate the hydraulic 3-point lift controls while someone is directly behind the tractor or near the Powered Rake.

!DANGER

Do not operate the hydraulic cylinder controls while someone is directly behind the tractor or near the Powered Rake.

12 PR1660, PR1672 & PR1690 Powered Rakes 314-216M

10/20/06

Page 14
Image 14
Land Pride PR1672 manual Operating Check List, Operating Checklist, Transporting, Operating Instructions

PR1672 specifications

The Land Pride PR1672 is a versatile and robust landscape rake designed for a variety of applications, including grading, leveling, and clearing debris from uneven terrains. With an impressive working width of 72 inches, this rake is suitable for use with compact tractors and utility vehicles, making it an ideal choice for both professional landscapers and homeowners looking to maintain their properties.

One of the key features of the PR1672 is its heavy-duty construction. Built with high-quality materials, the rake is engineered to withstand the rigors of tough landscaping tasks. The 3-point hitch attachment allows for easy connection to a wide range of tractors, ensuring compatibility and ease of use. The adjustable side rails enhance its functionality, enabling operators to control the depth of the rake and optimize its performance based on varying soil conditions and desired outcomes.

The rake’s design includes curved tines that are strategically spaced to effectively gather and redistribute soil, gravel, and other materials. This innovative tine design helps in achieving a smooth finish while minimizing the likelihood of clogging, which can be a common issue with traditional rakes. Additionally, the tines are replaceable, making maintenance straightforward and extending the tool’s overall lifespan.

Incorporating advanced manufacturing techniques, the PR1672 features a durable powder-coated finish that provides resistance against rust and corrosion. This ensures that the rake can endure various weather conditions and remains effective for years to come. The implement also benefits from Land Pride's commitment to safety, with features designed to protect both the user and the equipment being operated.

The versatility of the PR1672 extends beyond mere landscaping. It can also be employed in agriculture, helping to prepare seedbeds or maintain farm roads. Its adaptability makes it an invaluable tool for anyone looking to improve their outdoor spaces efficiently.

Overall, the Land Pride PR1672 is an essential piece of equipment that delivers reliability and performance. With its robust build, smart design features, and user-friendly operation, it stands out as an excellent solution for those looking to take on challenging outdoor tasks while achieving professional results. Whether tackling residential projects or commercial landscapes, the PR1672 is equipped to handle the job with ease.