Land Pride SP3084, SP3072 Long Term Storage, Lubrication Points, Maintenance & Lubrication

Table of Contents

Section 4: Maintenance & Lubrication

Maintenance

Proper servicing and adjustment is the key to the long life of any implement. With careful inspection and routine maintenance, you can avoid costly down time and repair.

Check all bolts after using unit for several hours to be sure they are tight. Replace any worn, damaged, or illegible safety labels by obtaining new labels from your Land Pride Dealer.

The parts on your Soil Pulverizer have been specially designed and should only be replaced with genuine Land Pride parts. Do not alter the pulverizer in a way which will adversely affects its performance.

Long Term Storage

Clean, inspect, service, and make necessary repairs to the pulverizer when parking it for long periods and when parking it at the end of a working season. This will help ensure the pulverizer is ready for field use the next time you hook-up to it.

1.Clean off any dirt and grease that may have accumulated on the pulverizer and moving parts. Scrape off compacted dirt and then wash surface

thoroughly with a garden hose. A coating of oil may be applied to the wear areas to minimize oxidation.

2.Check shanks a for wear and replace if necessary. See “Shanks” on page 9.

3.Repaint parts where paint is worn or scratched to prevent rust. Ask your Land Pride dealer for aerosol touch-up paint. They are also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.

Land Pride Aerosol Touch-up Paint

Part No. Part Description

821-011C PAINT LP BEIGE AEROSOL SPRAY CAN

821-002C PAINT LP BLACK AEROSOL SPRAY CAN

821-066C PAINT ORANGE AEROSOL SPRAY CAN

4.Replace all damaged or missing decals.

5.Lubricate as noted below.

6.Store pulverizer on a level surface in a clean, dry place. Inside storage will reduce maintenance and make for a longer pulverizer life.

Lubrication Points

Lubrication Legend

Multi-purpose	Multi-purpose	Multi-purpose	50
spray lube	grease lube	oil lube

Intervals in hours at which lubrication is required

			10
			Hours
			Rear Roller Bearing
			Both ends
			Type of Lubrication: Multi-purpose grease lube
			Quantity = As Required
		30155
			10
			Hours
			SP30 Double Rear Roller Bearing
			Both ends
			Type of Lubrication: Multi-purpose grease lube
			Quantity = As Required
		17841
10	SP2060, SP2072, SP3072 & SP3084 Soil Pulverizers	307-099M	7/11/12