Table of Contents
Important Safety Information
Safety Labels
Your Soil Pulverizer comes equipped with all safety labels in place. They were designed to help you safely operate your implement. Read and follow their directions.
1.Keep all safety labels clean and legible.
2.Replace all damaged or missing labels. Order new labels from your nearest Land Pride dealer. To find your nearest dealer, visit our dealer locator at landpride.com.
3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request.
4.Refer to this section for proper label placement. To install new labels:
a.Clean the area the label is to be placed.
b.Spray soapy water on the surface where the label is to be placed.
c.Peel backing from label. Press firmly onto the surface.
d.Squeeze out air bubbles with the edge of a credit card or with a similar type straight edge.
30155 |
|
| |
| General Caution Decal |
4 | SP2060, SP2072, SP3072 & SP3084 Soil Pulverizers | 7/11/12 |
