Land Pride 357-131A ZT72 ZXT54 Assembly Instructions, ZXT54 Kit No. 357-278A, Refer to Figure

Land Pride

ZXT54 Assembly Instructions

ZXT54 Assembly Instructions

ZXT54 Kit No. 357-278A

Use the list below that is for your Mulching Baffle Kit as a checklist to inventory parts received. Please contact your local Land Pride dealer for any missing hardware.

1.Park mower on a flat surface, move control levers fully out, set park brake lever to on, shut engine off and remove spark plug wire from spark plug.

2.Remove deck cover and raise front end of mower enough to allow room to install the baffles.

NOTE: Be sure to properly block up mower so it can not move after it is raised.

Refer to Figure 5:

3.Locate pilot holes (A) which have knock-outs in the deck. Punch-out these holes. Make sure knock-outs are completely removed.

4.Mount baffles (#1 and #2) to the deck with 5/16"-18 x 1" GR5 round head square neck bolts (#6) and hex whiz nut (#7). Tighten nuts to 17 ft-lbs.

26588

5.Mount baffle (#3) to the deck with two 3/8"-16 x 1" GR5 hex head cap screws, 3/8" flat washers and one 3/8"-16 x 3/4" round head square neck bolt (#5). Secure bolts with 3/8" hex whiz nuts (#8). Tighten nuts to 31 ft-lbs.

6.Lower unit and reconnect spark plug wire.

357-278A ZXT54 MULCHING BAFFLE KIT

Your kit includes: (Note: Blades Are Not Included)

Item	Qty.		Part No.Part Description
1	1	357-248H	MULCH BAFFLE, FRONT, RIGHT
2	1	357-249H	MULCH BAFFLE, FRONT, LEFT
3	1	357-250H	MULCH PLUG
4	2	802-017C	HHCS 3/8-16 x 1 GR5
5	1	802-149C	RHSNB 3/8-16 x 3/4 GR5
6	4	802-282C	RHSNB 5/16-18 X 1 GR5
7	4	803-043C	NUT HEX WHIZ 5/16-18 PLT
8	3	803-198C	NUT HEX WHIZ 3/8-16 PLT
9	2	804-012C	WASHER FLAT 3/8 SAE PLT
	1	357-129M	MULCHING BAFFLE KIT MANUAL Z MOWER

ZXT54 Mulching Baffle Kit

Figure 5

Mulching Blade Ordering

Information

Mower Model	Requires 3 Blades
ZXT54	890-991C 18.77" Mulch Blade

6/23/08 ■ Manual No. 357-129M 5