Parts Packed Separately In Carton, 8-13, 14-15

SAFETY RULES	2-3
PRODUCT SPECIFICATIONS	3
CUSTOMER RESPONSIBILITIES	3
WARRANTY	32
ASSEMBLY / PRE-OPERATION	5-7
OPERATION	8-13

MAINTENANCE	14-15
MAINTENANCE SCHEDULE	14
SERVICE AND ADJUSTMENTS	16-18
STORAGE	18
TROUBLESHOOTING	19
REPAIR PARTS	20-31

PARTS PACKED SEPARATELY IN CARTON

Page 4

Image 4

Poulan 187881 Parts Packed Separately In Carton, 8-13, 14-15, Service And Adjustments, 16-18, 20-31, Safety Rules, Storage

Contents

SNOW THROWER IMPORTANT MANUALPP5524ESB Do Not Throw Away SAFETY RULES Safe Operation Practices for Snow ThrowersTRAINING PREPARATION PRODUCT SPECIFICATIONS MAINTENANCE AND STORAGECUSTOMER RESPONSIBILITIES PARTS PACKED SEPARATELY IN CARTON SERVICE AND ADJUSTMENTSSAFETY RULES PRODUCT SPECIFICATIONS ASSEMBLY / PRE-OPERATION HOW TO SET UP YOUR SNOW THROWERREMOVE SNOW THROWER FROM CARTON INSTALL SPEED CONTROL ROD See Figs. 1 and INSTALL TRACTION DRIVE CONTROL ROD See Figs. 3 and INSTALL AUGER CONTROL ROD See Figs. 5 and INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD See Fig CHECK TIRE PRESSURE OPERATION KNOW YOUR SNOW THROWER MEETS A.N.S.I. SAFETY REQUIREMENTS Recoil auxiliary starter handle - used for starting the engine HOW TO USE YOUR SNOW THROWER TO USE CHOKE CONTROL See FigSTOPPING TO USE FUEL SHUT-OFF VALVE See Fig TO THROW SNOW See Fig TO MOVE FORWARD AND BACKWARD See FigHIGH POSITION KNOB CHUTE DEFLECTOR LOW POSITION AUGER CONTROL LEVER BEFORE STARTING THE ENGINE TO ADJUST SKID PLATES See FigSCRAPER BAR CHECK ENGINE OIL LEVEL See Fig BEFORE STOPPING SNOW THROWING TIPSIF RECOIL STARTER HAS FROZEN MAINTENANCE GENERAL RECOMMENDATIONSBEFORE EACH USE LUBRICATION CLEANING ENGINEV-BELTS AUGER GEAR CASE SERVICE AND ADJUSTMENTS 1. Be sure throttle is in STOP position 2. Remove safety ignition keyTO ADJUST SNOW THROWER HEIGHT CHUTE DEFLECTOR TO REPLACE BELTS See Fig STORAGE OTHERTO REMOVE WHEELS See Fig CARBURETOR TROUBLESHOOTING Loss of powerDoes not start Engine idles or LIMITED WARRANTY

SAFETY RULES

PRODUCT SPECIFICATIONS

CUSTOMER RESPONSIBILITIES

WARRANTY

ASSEMBLY / PRE-OPERATION

OPERATION

8-13

MAINTENANCE

14-15

MAINTENANCE SCHEDULE

SERVICE AND ADJUSTMENTS

16-18

STORAGE

TROUBLESHOOTING

REPAIR PARTS

20-31

PARTS PACKED SEPARATELY IN CARTON