38 |
To memorize USER DEFAULT settings:
Many of the current configuration settings can be stored as a USER DEFAULT, which can be activated at any time from this menu screen. To save the current settings as a USER DEFAULT, place the highlight on the SET USER DEFAULT line using the UP/DOWN buttons and use the +/– buttons to change the setting to YES. Press the ENTER button to store the new USER DE- FAULT settings. To return to the MAIN menu without saving any changes, change all en- tries on the screen to NO and press the EN- TER button.
NOTE: If there is insufficient memory to store a USER DEFAULT configuration file, the SET USER DEFAULT option will not be available.
To activate memorized USER DEFAULT
settings: After you have stored a USER DE- FAULT configuration file, you can activate those settings at any time by placing the highlight on the USER DEFAULT line using the UP/ DOWN buttons. Use the +/– buttons to change the setting to YES. Press the ENTER button to proceed with activating the USER DEFAULT settings. To return to the MAIN menu without activating the USER DEFAULT settings, change the entry to NO and press the ENTER button.
MORE INFORMATION
Troubleshooting
The unit does not turn on.
•Make sure the power cord is plugged into the rear panel and a live AC wall outlet.
•Make sure the rear panel POWER switch is in the ON position
No sound from any input.
•Make sure that MUTING is off and VOL- UME is turned up. If the TFT screen and the TV monitor are turned off, the MUTING can be on with no visual indication.
•Make sure that preamp outputs are con- nected to a power amplifier and that the amplifier is turned on.
•Make sure source inputs are connected and configured correctly.
No sound from digital sources.
•Make sure that digital input connector is assigned to the proper source input and that the source input is configured to use the digital input rather than an analog input.
•Check the configuration of the DVD player to ensure that the bitstream and/or DTS digital output is activated.
No sound from some speakers.
•Check all power amp and speaker con- nections.
•Check Speaker Configuration settings in the Setup menus.
No video output on TV monitor.
•Make sure that the TV monitor is connected properly. Component video outputs can send any type of signal to the TV. Com- posite video connections can only send video from composite sources and
•Make sure the NTSC/PAL switch is set properly.
No video or distorted video on TFT screen.
•Make sure that a composite video source is selected for display on the TFT screen. The TFT screen cannot display
•When progressive scan video from a DVD player is being received at the Component Video inputs, the composite video signal from the DVD player may be corrupted.
OSD menus are not displayed on TV Monitor or TFT screen.
•Go to Setup menus and configure OSD menus to be displayed on the TV monitor and/or the TFT screen.
•In some PAL systems, the menus may not be displayed unless there is an active video signal. Use the TFT screen for menu opera- tion.
•When using progressive scan video sig- nals, make sure that the progressive mode is set to YES in the Display Options setup menu. This allows the display of the main setup OSD menus on the TV monitor by interrupting the progressive scan video signal and restoring it after the OSD menus are cancelled. The temporary information screens (such as volume, etc.) cannot be displayed on the TV monitor when progres- sive scan signals are being used.
