Chapter 4: XPress DR+W
XPress DR+ User Guide 32
LEDs Table 4-1. XPress DR+W LED Functions
LED Status Meaning
Serial port - TXD LED (Yellow) Off No data being transmitted from XPress DR+
Blinking Data being transmitted from XPress DR+
Serial port - RXD LED (Green) Off No data being received by XPress DR+
Blinking Data being received by XPress DR+
Ethernet port - 10/100 Link (Green)
Off No Ethernet link established.
Steady On Ethernet link established.
Ethernet port – Activity (Yellow)
Off No data activity
Blinking Data activity
Power/Diagnostic LED (Orange) Steady On Power OK
Blinking 2x No DHCP response
Blinking 2x Setup Menu active
Wireless LED (Yellow) Off Wireless off (not configured for wireless)
Off Wireless on, searching
Blinking (very short) Wireless on, attempting to associate
On Wireless on, associated, power management off
On when receiving or
transmitting, off in-between
Wireless on, associated, power management on
Hardware Address
Take note of the unit’s hardware address (also known as MAC address). It is on
the product label, in the format: 00-20-4a-XX-XX-XX, where the XXs are unique
numbers assigned to the product.
Hardware Address: 00-20-4a-_____-_____-_____
IP Address
The XPress DR+W must have a unique IP address on the network. The systems
administrator generally provides the IP address, subnet mask, and gateway.