Lantronix EDS1100, EDS2100 quick start - page 7

Linux Software Developers Kit (SDK) Quick Start Guide 7
3
3. . T Ta ar rg ge et t S Se et tu up p
Connecting the Lantronix Evaluation Board
This section describes how to connect the MatchPort AR evaluation boar d or XPort Pro demo board to
your host computer and network.
Connecting an Evaluation Board – Power
1. Make sure that the power switch on the evaluation or demo board is set to of f.
2. Select the appropriate power plug adaptor for your geographical location. I nsert it into the slot on the
Universal Power Supply; then plug the power supply into an outlet.
3. Connect the output plug of the power supply to the evaluation or dem o board.
Connecting an Evaluation Board – Serial Port
1. Connect one end of the supplied DB9F/F (DB25F on EDS1100) serial cab le to the serial port on the
laptop or desktop.
2. Connect the other end of the supplied DB9F/F serial cable to the serial port on the evaluation board
(CON1 on MatchPort AR and EDS2100).
Figure 3-1. Connecting an Evaluation Board via Serial Port