EDS Device Servers User Guide 12
8
A: Factory Default Configuration
This appendix lists the EDS factory-default configuration. The types of settings are in
alphabetical order.

Network Configuration Settings

Network Configuration
Parameters
Network Configuration Settings
BOOTP Client Off (disabled)
DHCP Client On (enabled)
IP Address 0.0.0.0 (auto-IP if DHCP fails)
Network Mask 0.0.0.0 (auto if DHCP fails)
Gateway 0.0.0.0
MAC Address Specified by manufacturer
Hostname None
Domain None
DHCP Client ID None
Ethernet Auto speed, auto duplex

Serial Port Line Settings

Serial Port Line
Parameters
Serial Port Line Settings
Status Enabled
Baud Rate 9600 baud
Parity None
Data Bits 8
Stop Bits 1